Mostrando ítems 21-30 de 34
Nicosevici, Tudor (Fecha de defensa: 2009-12-18)
El modelat d'escenes és clau en un gran ventall d'aplicacions que van des de la generació mapes fins a la realitat augmentada. Aquesta tesis presenta una solució completa per a la creació de models 3D ...
Massaguer Colomer, Eduard (Fecha de defensa: 2016-07-26)
In this work, we investigate harvesting thermoelectric energy from wasted heat in fluid networks and propose a generic tool for the simulation and sizing of thermoelectric energy harvesters, that can ...
Abdel Monsef, Said Ahmed Ibrahim (Fecha de defensa: 2020-07-02)
Cohesive zone models are widely used for modelling delamination and bonded joints under different loading conditions. In the current thesis, an objective inverse method has been developed to extract the ...
Fernandes Freitas, Dino Miguel (Fecha de defensa: 2019-11-29)
Tissue Engineering plays a vital role in tissue construct to repair, maintain or replace tissues. Those tissues can be cultivated in vivo or in vitro using devices such as bioreactors. There are several ...
Iglesias, Alex (Fecha de defensa: 2016-02-04)
Chatter is one of the major problems in today’s milling processes. Theoretical models to calculate stability lobes are used to predict and avoid chatter onset. However, current predictions are not ...
Bagudanch Frigolé, Isabel (Fecha de defensa: 2017-11-16)
Incremental Sheet Forming (ISF) technology has been mainly applied on metallic sheets during the last years. ISF is used due to its flexibility, low costs, low batch production, production of complex ...
Comamala Laguna, Martí (Fecha de defensa: 2019-07-31)
Since the beginnings of the automotive driven with internal combustion engines all the cycles used in the alternative motors share a thermal characteristic, a large amount of heat released by the fuel ...
Sans Canovas, Daniel (Fecha de defensa: 2013-06-26)
The use of composite materials in industrial applications such as aeronautical, aerospace or wind energy production has greatly increased in recent decades. Due to their inherent properties, these ...
Sebaey Abdella, Tamer Ali Abdella (Fecha de defensa: 2013-01-11)
The main objective of the thesis is to assess the damage resistance and damage tolerance of the non-conventional dispersed laminates and compare the response with the conventional ones. However, part ...
Wagih Abdallah Abdel Hady, Ahmed (Fecha de defensa: 2018-05-28)
The objective of the thesis is to provide scaling tool predicting the response of composite structures under out-of-plane loading by testing small coupons. This global objective cannot be achieved without ...