Lores Garcia, Eduard (Date of defense: 2017-12-22)
Machines and mechanisms can usually exhibit a vibratory behavior during operation since they are formed by deformable solids of non-negligible mass and non-rigid joints. This oscillatory behavior can ...
Torrent Gelmà, Miquel (Date of defense: 2023-03-31)
(English) Pumps of positive volumetric displacement (PDVP) drive a volume of fluid from suction to discharge for each revolution of its shaft, called derived capacity, and therefore, in an ideal constant ...
Torres Chamorro, Lisbeth Alejandra (Date of defense: 2023-07-03)
(English This dissertation is an experimental assessment of the tool-part tribological interaction of continuous deformation processes: ball burnishing as a superfinishing process and wire drawing as a ...
Monshi Tousi, Navid (Date of defense: 2023-06-16)
(English) The PhD focuses on the study of the flow around an airfoil at different Angles of Attack (AoA) with and without the implementation of Active Flow Control (AFC), while maintaining the Reynolds ...
Adrover Monserrat, Bàrbara (Date of defense: 2023-02-24)
(English) The mechanical characterization of new materials used in the Material Extrusion technique (MEX) in 3D printing is essential. The use of this technique is growing and with it the possible ...
Loaiza Duque, Julián David (Date of defense: 2023-10-27)
(English) The most common tremor disorders worldwide are Parkinson's Disease and Essential Tremor. The gold standard for diagnosing these movement disorders is medical evaluation by neurologists, but ...
Velázquez Corral, Eric (Date of defense: 2023-09-05)
(English) This thesis is an experimental investigation into the beneficial effects of the ultrasonic vibration-assisted ball burnishing process on the wear resistance and fatigue life-cycle enhancement ...
Martínez Martínez, Borja (Date of defense: 2024-01-11)
(English) The primary goal of this thesis is to unlock the potential of hemp stalk, an agricultural byproduct that currently lacks practical applications. The overarching aim is to promote the use of ...