Ara mostrant els elements 11-20 de 63
Otegi Aldai, Karmele (Data de defensa: 2019-06-10)
Electric Arc Furnace Slag (EAFS) is the by-product generated in the steel making process in electric arc furnaces. According to the European slag association, EUROSLAG, 18,4Mt of steel slag have been ...
Cots Corominas, Carles (Data de defensa: 2022-05-06)
This thesis develops a new structural strengthening technique: converting existing reinforced concrete structures to composite sections by inserting connectors after controlled demolition with high-pressure ...
Mora Ortiz, René Sebastián (Data de defensa: 2016-03-03)
The microstructure, understood as the distribution of pore sizes and their connectivity, is an important factor that affects the mechanical behaviour and the hydraulic properties of compacted soils with ...
Liaudat, Joaquín (Data de defensa: 2018-06-15)
This thesis aims at deepening in the understanding of the mechanisms by which the stress state affects the development of concrete expansions and cracking due to the Alkali-Silica Reaction (ASR). With ...
Garcia Gil, Livia (Data de defensa: 2019-06-20)
Traditional design procedures of asphalt mixtures are based on volumetric parameters and the compliance with certain mechanical and functional properties, and do not provide minimum requirements in terms ...
Fraccica, Alessandro (Data de defensa: 2019-12-09)
The thesis is aimed at characterising the multi-scale and hydro-mechanical behaviour of lightly compacted silty sand penetrated by a turf-grass (Cynodon Dactilon). The study will allow better assessing ...
Rodríguez Frete, Mariana (Data de defensa: 2020-12-16)
Concrete is one of the most used materials in construction, and its application spans to all kinds of structures. For this reason, concrete has been the subject of intense study. In spite of that, there ...
Titscher, Thomas (Data de defensa: 2019-09-27)
Concrete is a complex material and can be modeled on various spatial and temporal scales. While simulations on coarse scales are practical for engineering applications, a deeper understanding of the ...
Shen, Yanfei (Data de defensa: 2019-12-02)
In AISC 360-16, the Direct Analysis Method (DM) has been set as the primary method for the stability design of frames. DM, considering initial global sway imperfection, is essentially Geometrically ...
Kharazian, Alireza (Data de defensa: 2017-11-23)
Collision between adjoining buildings is relevant, since the huge impact forces significantly modify the buildings dynamic behaviour. The separation required by the regulations avoids pounding; however, ...