Otegi Aldai, Karmele (Date of defense: 2019-06-10)
Electric Arc Furnace Slag (EAFS) is the by-product generated in the steel making process in electric arc furnaces. According to the European slag association, EUROSLAG, 18,4Mt of steel slag have been ...
Cots Corominas, Carles (Date of defense: 2022-05-06)
This thesis develops a new structural strengthening technique: converting existing reinforced concrete structures to composite sections by inserting connectors after controlled demolition with high-pressure ...
Mora Ortiz, René Sebastián (Date of defense: 2016-03-03)
The microstructure, understood as the distribution of pore sizes and their connectivity, is an important factor that affects the mechanical behaviour and the hydraulic properties of compacted soils with ...
Liaudat, Joaquín (Date of defense: 2018-06-15)
This thesis aims at deepening in the understanding of the mechanisms by which the stress state affects the development of concrete expansions and cracking due to the Alkali-Silica Reaction (ASR). With ...
Garcia Gil, Livia (Date of defense: 2019-06-20)
Traditional design procedures of asphalt mixtures are based on volumetric parameters and the compliance with certain mechanical and functional properties, and do not provide minimum requirements in terms ...
Fraccica, Alessandro (Date of defense: 2019-12-09)
The thesis is aimed at characterising the multi-scale and hydro-mechanical behaviour of lightly compacted silty sand penetrated by a turf-grass (Cynodon Dactilon). The study will allow better assessing ...
Rodríguez Frete, Mariana (Date of defense: 2020-12-16)
Concrete is one of the most used materials in construction, and its application spans to all kinds of structures. For this reason, concrete has been the subject of intense study. In spite of that, there ...
Titscher, Thomas (Date of defense: 2019-09-27)
Concrete is a complex material and can be modeled on various spatial and temporal scales. While simulations on coarse scales are practical for engineering applications, a deeper understanding of the ...
Shen, Yanfei (Date of defense: 2019-12-02)
In AISC 360-16, the Direct Analysis Method (DM) has been set as the primary method for the stability design of frames. DM, considering initial global sway imperfection, is essentially Geometrically ...
Kharazian, Alireza (Date of defense: 2017-11-23)
Collision between adjoining buildings is relevant, since the huge impact forces significantly modify the buildings dynamic behaviour. The separation required by the regulations avoids pounding; however, ...