Application of chemometric methods to water quality studies

dc.contributor
Universitat de Barcelona. Departament de Química Analítica
dc.contributor.author
Yordanov Platikanov, Stefan
dc.date.accessioned
2017-02-07T12:54:16Z
dc.date.available
2017-02-07T12:54:16Z
dc.date.issued
2016-07-11
dc.identifier.uri
http://hdl.handle.net/10803/399917
dc.description.abstract
Chemometric methods have been used to explore and analyze information regarding potable and waste water quality in this Thesis. The analyzed data were obtained from (a) drinking water disinfection processes, (b) wastewater treatment processes, (c) water sensorial analysis, and (d) laboratory experiments. This Thesis attempts to improve our knowledge regarding common water quality problems, such as the formation of trihalomethanes (THMs) disinfection by-products (in the Sant Joan Despi Drinking Water Treatment Plant of Barcelona, SJD-DWTP) and the main factors affecting their formation. Furthermore, the Thesis illustrates how to facilitate the monitoring of water quality in a Wastewater Treatment Plant of Girona town (WWTP) by applying chemometric methods. Further objectives of the Thesis include the development of a chemometric method for source apportionment, where drinking waters with different origins were blended (as it usually occurs inside the Barcelona drinking Water Distribution System, WDS) using measured ultraviolet absorbance and physicochemical parameters. This Thesis additionally considered the problem of water taste by developing models, where water taste is explained and predicted based on the mineral content of tap and bottled waters using panelists. The chemometric methods, applied in this Thesis, have been applied to multi-parametric data matrices generated using different instrumental analyses techniques, such as laboratory UVVIS spectrophotometer, Gas Chromatograph with Electron Capture Detector (GC-ECD) and Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Additionally, data was obtained by implementation of standard methods for estimation of different physicochemical parameters or by multi-parametric data extractions from the Laboratory Information Management System (LIMS). Data was also acquired from an automatic multi-parametric station for online monitoring and from carefully designed sensorial experiments. In this Thesis, different linear projection based methods, such as Principal Component Analysis (PCA), Principal Component Regression (PCR) and Partial Least Squares regression method (PLS), have been used and shown as appropriate for handling data. Different linear regression methods have been compared to powerful nonlinear regression methods such as Kernel radial basis function Partial Least Squares (K-PLS) and Support vector machine regression (SVR) methods. Among the most significant findings of this Thesis was the identification of a set of parameters, which are highly relevant for the trihalomethanes formation, such as water temperature, organic matter fractions and concentration, chlorine concentrations, turbidity, bromide/chloride ions concentrations, pumped underground water and carbon filters age. Chemometric models, with low prediction errors for all THMs species, have been developed at SJD-DWTP. The most important physicochemical parameters for panellist water taste liking were found to be: HCO3- , SO42-, Ca2+, and Mg2+ at moderate concentration of the overall mineralization and pH. Temporal variation with a different data frequency (daily, monthly and annual cycles) were observed in WWTP water quality and suggested different plant management and operational procedures. A chemometric model was developed to predict source apportionment inside the Barcelona WDS. Five different water sources were detected in water blends. Finally, different chemometric techniques for visualization and data interpretation have been tested and evaluated for their usefulness for water quality analyses. The prediction ability of linear or nonlinear regression methods have been compared when they were used to develop empirical models and predict water quality parameters such as THMs concentrations in drinking waters, nitrates, phenols, organic matter in wastewaters, water source apportionments in water distribution system and panelists taste ratings of water samples. Last but not least, this Thesis had as an objective to demonstrate the advantages of using chemometric methods for water quality assessment. This work showed that complex problems can be resolved using a multivariate modeling methodology with a few experiments. Therefore, this methodology is a significant improvement over unvaried approaches which are based on expensive and time-consuming measurements.
en_US
dc.description.abstract
En esta Tesis, se propone la utilización de diferentes métodos quimiométricos para la exploración, el análisis y la interpretación de la información presente en datos experimentales obtenidos en la determinación de la calidad de aguas potables y de aguas residuales. Los conjuntos de datos analizados fueron obtenidos en (a) procesos de desinfección de agua potable, (b) procesos de tratamiento de agua residual, (c) análisis sensoriales del gusto del agua mediante panelistas, y (d) experimentos en laboratorio que simulan procesos de desinfección. Los métodos quimiométricos empleados en esta Tesis incluyen el Análisis de Componentes Principales (PCA), la Regresión Lineal Múltiple (MLR), la Regresión de Componentes Principales (PCR) y el método de regresión de Mínimos Cuadrados Parciales (PLS). Se han comparado estos diferentes métodos de regresión lineal con los métodos de regresión no lineal, tales como el procedimiento ‘kernel’ de Mínimos Cuadrados Parciales (K-PLS) o el método de regresión basado en Máquinas de Soporte Vectores de Soporte (Support Vector Machine Regression, SVR). Los resultados más significativos de esta Tesis han sido: a) la identificación de un conjunto de parámetros fisicoquímicos ambientales y del proceso de desinfección del agua que tienen relevancia en la formación de trihalometanos; b) el desarrollo de modelos quimiométricos para la estimación de la estimación de los cambios de concentración de las cuatro especies de THM y de su suma en total en la planta de tratamiento de aguas ETAP-SJD con errores de predicción bajos; c) la identificación de que las especies HCO3-, SO42-, Ca2+, Mg2+ (a una concentración de mineralización total moderada) son los parámetros físico-químicos más relevantes para el gusto del agua; d) la detección de las variaciones temporales más importantes en la calidad del agua residual tratada en la planta de tratamiento de aguas EDAR de Trargisa en Girona, con una frecuencia diaria, mensual y estacional; e) el desarrollo de modelos de detección y de predicción de las fuentes u origines del agua potable dentro de la red de distribución de aguas, WDS, de la ciudad de Barcelona.
en_US
dc.format.extent
286 p.
en_US
dc.format.mimetype
application/pdf
dc.language.iso
eng
en_US
dc.publisher
Universitat de Barcelona
dc.rights.license
ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.
dc.source
TDX (Tesis Doctorals en Xarxa)
dc.subject
Quimiometria
en_US
dc.subject
Quimiometría
en_US
dc.subject
Chemometrics
en_US
dc.subject
Qualitat de l'aigua
en_US
dc.subject
Calidad del agua
en_US
dc.subject
Water quality
en_US
dc.subject
Química de l'aigua
en_US
dc.subject
Química del agua
en_US
dc.subject
Water chemistry
en_US
dc.subject.other
Ciències Experimentals i Matemàtiques
en_US
dc.title
Application of chemometric methods to water quality studies
en_US
dc.type
info:eu-repo/semantics/doctoralThesis
dc.type
info:eu-repo/semantics/publishedVersion
dc.subject.udc
543
en_US
dc.contributor.director
Tauler Ferré, Romà
dc.contributor.tutor
Galcerán Huguet, M. Teresa
dc.embargo.terms
cap
en_US
dc.rights.accessLevel
info:eu-repo/semantics/openAccess


Documentos

SYP_THESIS.pdf

7.289Mb PDF

Este ítem aparece en la(s) siguiente(s) colección(ones)