La Universitat Politècnica de Catalunya. Barcelona Tech (UPC) és una institució pública de recerca i d'educació superior en els àmbits de l'enginyeria, l'arquitectura i les ciències.
L’activitat dels seus campus i centres fan de la UPC un punt de referència i, en complicitat amb el teixit productiu, són agent i motor de canvi econòmic i social, en posar en valor la recerca bàsica i aplicada i transferir tecnologia i coneixement a la societat.
Els investigadors i investigadores de la UPC treballen des dels laboratoris i centres de recerca per augmentar la producció científica, valoritzar-la socialment a través de la transferència de resultats i continuar liderant projectes internacionals d’excel·lència, ja sigui a partir d’iniciatives pròpies o en col·laboració amb altres centres de recerca i universitats d’arreu del món.
Portal de la producció científica dels investigadors de la UPC.
Portal d'accés obert al coneixement de la UPC
Si sou doctor o doctora per la Universitat Politècnica de Catalunya i voleu publicar la vostra tesi a TDX, contacteu amb tdx@upc.edu. Per a més informació consulteu les preguntes més freqüents
Martínez Hernández, Marina (Fecha de defensa: 2023-12-20)
(English) Cardiovascular diseases are the most common cause of death in the world. The heart has a very limited regeneration capacity. Thus, following tissue damage – e.g., myocardial infarction –, heart transplantation ...
Rey Viñoles, Sergi (Fecha de defensa: 2023-11-03)
(English) The restoration of the functionality of lost teeth is mainly accomplished placing dental implants. However, in the case of alveolar bone atrophies, this treatment might not be possible. Various treatments have ...
García Masabet, Violeta del Valle (Fecha de defensa: 2023-11-24)
(English) The main objective of this work is to counteract the limitations of polylactic acid (PLA) and propose a sustainable manufacturing approach using bioblends of a rheologically modified PLA by reactive extrusion ...
Liang, Jing (Fecha de defensa: 2023-10-27)
(English) AlCrSiN quaternary coatings are extensively utilized in the tool industry due to their outstanding mechanical performance as protective coatings. These coatings are formed by introducing elements of Al and Si to ...
González Bertran, Judit (Fecha de defensa: 2023-10-25)
(English) In recent years, numerous studies have been carried out on functional textiles due to their ability to adapt and interact with the environment. In particular, special focus has been placed on dynamic textiles ...
Loaeza Becerril, Alfonso David (Fecha de defensa: 2023-07-19)
(English) In recent years, new white and opaque PET bottles (PET-O) have appeared and are used for packaging dairy products. These bottles contain titanium dioxide (TiO2) particles to prevent deterioration of the packaged ...
Lima, Marcos Natan da Silva (Fecha de defensa: 2023-06-30)
(English) Pre-salt oil exploration means a new development path for Brazil. This activity stimulates investments from national and foreign companies, boosts the production of technology, promotes greater professional ...
Carpio Garza, Marcel Francisco (Fecha de defensa: 2023-06-07)
(English) The automotive industry is constantly seeking to improve the performance of the car and at the same time reduce CO2 emissions into the environment, which can be achieved among other solutions through the use of ...
Yarahmadi, Mona (Fecha de defensa: 2023-05-26)
(English) Zirconia stands out among oxide ceramics for its superior mechanical properties. This approach resulted from the significant research that has been conducted since the discovery of the tbughening capabilities of ...
Chausse Calbet, Victor (Fecha de defensa: 2023-05-26)
(English) Bioresorbable stents (BRS) have been envisioned as a revolution in the treatment of coronary heart disease. Ideally, stents would initially retain sufficient radial strength after implantation to prevent vessel ...
García Mintegui, Claudia (Fecha de defensa: 2023-01-26)
(English) Biodegradable metals emerged as promising materials for bioresorbable devices avoiding the potential side effects of permanent implants. Among them, zinc (Zn) arose dueto its suitable degradation rate for biomedical ...
Monterde Gascón, María Carmen (Fecha de defensa: 2023-02-27)
(English) The transition towards to low carbon energy generation is promoting the installation of renewable energy sources, their successful deployment requires efficient energy storage systems in order to meet demand. ...
Janer Angelet, Marcel (Fecha de defensa: 2022-12-01)
(English) Ultrasonic moulding is a promising technology that could be used as a substitute for conventional injection moulding techniques. This relatively new technology has a lower energy consumption, and it could be a ...
Márquez Fibla, Irene (Fecha de defensa: 2022-09-14)
Labels misplacement in the bottles are currently causing problems in wine cellar's labelling lines. According to data provided by Codorníu and Torres cellars, 1% of the bottles present this issue. Once the wine or cava ...
Raymond, Yago (Fecha de defensa: 2021-09-13)
Bone grafting is a common medical practice in today’s society, being bone the second most transplanted tissue worldwide after blood. Therefore, it represents a field of major interest for both, biomedical research and the ...
Torres Garrido, Diego (Fecha de defensa: 2021-10-07)
Titanium (Ti) has been used for decades for bone prostheses due to its mechanical performance and good biocompatibility. However, the stress shielding effect, as a result of the stiffness mismatch between titanium and the ...
Pastorino, David (Fecha de defensa: 2015-11-23)
The topic of this Philosophy Doctor Thesis tallies with the national project MAT2012 of the BBT group of UPC: "Pore4Bone: Biomimetic calcium phosphates: tailoring porosity from the nano- to the macroscale for osteoinduction, ...
Hamouda, Inés (Fecha de defensa: 2020-12-16)
This PhD Thesis tallies with the Starting Grant project funded by the European Research Council (ERC) entitled “Atmospheric Pressure plAsma meets biomaterials for bone Cancer HEaling” (APACHE) and has been carried out ...
Cerra Flórez, Mauro Andrés (Fecha de defensa: 2021-10-04)
The aging heat treatments in maraging steels are fundamental to achieving their excellent mechanical properties and, in some applications using oxidation surface treatments lead to induce a superficial layer formed by iron ...
Castejón Galán, María del Pilar (Fecha de defensa: 2020-12-17)
This dissertation investigates the three-stage method MEAUS (melt-extrusion, annealing, and uniaxial stretching) for producing microporous membranes. This method for membrane preparation is a solvent-free process based on ...
620 - Ensayo de materiales. Materiales comerciales. Economía de la energía (26)
66 - Ingeniería, tecnología e industria química. Metalurgia (15)
615 - Farmacología. Terapéutica. Toxicología. Radiología (3)
616.3 - Patología del aparato digestivo. Odontología (2)