Electrodeposició de capes metàl·liques per a la seva incorporació en sensors i actuadors / Metallic films deposition for their incorporation in sensors and actuators

Author

Cortés Francisco, Meritxell

Director

Vallés Giménez, Elisa

Gómez Valentín, Elvira

Date of defense

2012-11-30

Legal Deposit

B. 33998-2012

Pages

290 p.



Department/Institute

Universitat de Barcelona. Departament de Química Física

Abstract

Electrodeposition involves chemical phenomena associated with charge separation and transfer that can occur homogeneously in solution, or heterogeneously over electrode surfaces. In order to assure electroneutrality at least two charge transfer half-reactions should take place. In the case of heterogeneous redox reactions, these half-reactions occur over two different electrodes immersed in a solution. It presents several advantatges over other methods commonly used to prepare films and structures which require vacuum conditions, physical or chemical vapor deposition (PVD or CVD), plasma enhanced deposition (PLD), sputtering. One of these advantages is its low cost and high simplicity of the experimental setup. The equipment used is cheap and maintenance is hardly required. On the other hand, room temperature is commonly used to grow the material or, at least, temperatures lower than 100°C. Nowadays electrodeposition is used in a wide range of applications as metal processing and finishing. Electroplating is a process widely used in industry for coating metal objects with a thin layer of a different metal. It is one of the most important in terms of volume of production, and it also has one of the greatest economic impacts. The purpose of these coatings is to provide the metal object with some desired property that the metal object does not have. Electrodeposition has come a long way since its inception; developing new techniques that have increased the range of applications of the same. This thesis mainly focuses on the new applications and uses of electrodeposition as a tool of fabricating some materials that can be integrated in different kind of devices such as sensors and actuators. Electrodeposition has a high materials and structures versatility that can be obtained which permits its integration in lots of processes. In this tesis different applications for electrodeposition have been studied: First of all, the design, preparation and characterisation of planar coils to be implemented in inductive biosensors has been performed. It was necessary to perform the study of the optimum bath, electrodeposition conditions and fabrication processes to prepare robust, low resistant and adherent planar copper coils of different aspect ratios, which allow detecting magnetic particles. In order to do that, simulations of the main parameters based in previous designs to improve the sensitivity of the coils have been executed. The final objectives were the fabrication of the new designed coils and to perform the first tests of their sensing ability. Then, the deposition of a hard magnetic alloy for MEMS application has been tested. A basic study of the electrodeposition process of the CoPt alloy to find the optimum bath has been performed. Structures with different shapes and geometries (films, thin films, photolitographied microstructures, nanoparticles, nanowires...) over different substrates have been obtained applying the conditions based on the previous electrochemical results. The influence of the electrodeposition and preparation conditions on the properties of the CoPt alloy (morphology, composition, crystalline structure, magnetic properties,) and analysis of the relationship among those properties has been studied. Finally, the organic monolayer formation on top of several electrodeposited magnetic substrates (magnetic/non-magnetic assembly) as the first step to fabricate a molecular spintronic device has been performed. The preparation of smooth thin films of magnetite and CoP by means of electrodeposition and the formation and study of octanethiol and acid oleic monolayers on top have been achieved as the first step to obtain a molecular spintronic device. Electrodeposition has been demonstrated to be a useful technique for the design and fabrication of micro/nanomaterials with specific properties that allow them to be implemented in biosensors, MEMS and molecular spintronic devices.


Aquesta tesi es centra principalment en les noves aplicacions i usos de l'electrodeposició com a eina de fabricació de nous materials que poden ser integrats en diferents tipus de dispositius com ara sensors i actuadors. L'electrodeposició presenta diversos avantatges respecte a altres tècniques, sobre tot respecte aquelles que utilitzen el buit. Els objectius específics plantejats en aquesta tesi han estat en primer lloc el disseny, preparació i caracterització de bobines planes per fabricar biosensors inductius. Per això ha calgut escollir el bany i les condicions de treball òptims, així com els processos de fabricació més adequats a seguir per tal de preparar bobines planes de coure resistents, robustes, ben definides i adherents amb diferents relacions d'aspecte, que siguin capaces de detectar partícules magnètiques. També s'han realitzat càlculs simulant els principals paràmetres de les bobines per millorar-ne la sensibilitat. En una etapa posterior, s'han fabricat les noves bobines dissenyades i s'han dut a terme les primeres proves de la capacitat de detecció. En segon lloc, es va proposar la deposició d'un aliatge magnètic dur per a la seva aplicació en MEMS. L'aliatge escollit va ser el CoPt. Per tal de trobar un bany òptim per a la seva deposició s'ha dut a terme l'estudi bàsic del procés d'electrodeposició de l'aliatge. S'han preparat estructures amb diferents formes i geometries (dipòsits, pel•lícules primes, microestructures, nanopartícules, nanofils, ...) sobre diferents substrats i s'ha estudiat la influència de les condicions d'electrodeposició sobre les propietats de l'aliatge de CoPt (morfologia, composició, estructura cristal•lina, propietats magnètiques, ...) i s'ha realitzat l'anàlisi de la relació entre aquestes propietats. Per últim, s'ha dut a terme un estudi inicial de la formació de monocapes orgàniques sobre diferents substrats magnètics, com al primer pas per fabricar un dispositiu d'espintrònica molecular. Per aquest motiu s'han preparat pel•lícules primes de magnetita i d'aliatge CoP per mitjà de l'electrodeposició i s'ha dut a terme l'estudi de la formació de les monocapes d'octanotiol i d'àcid oleic sobre els substrats

Keywords

Galvanoplàstia; Galvanoplastia; Electroplating; Pel·lícules metàl·liques; Películas metálicas; Metallic films; Materials nanoestructurals; Materiales nanoestructurados; Nanostructured materials; Biosensors; Biosensores; Electroquímica; Electrochemistry

Subjects

544 - Physical chemistry

Knowledge Area

Ciències Experimentals i Matemàtiques

Documents

MCF_THESIS.pdf

13.24Mb

 

Rights

ADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.

This item appears in the following Collection(s)