Now showing items 3969-3988 of 5534
Serra López, Roger (Date of defense: 2018-05-22)
Structural health monitoring has been defined as the acquisition, validation and analysis of technical data to facilitate life- cycle management decisions. It is the result of a convergent path from many previous existing ...
Kessentini, Hamdi (Date of defense: 2014-02-14)
In this thesis a flat plate collector (FPC) with plastic transparent insulation materials (TIM) and a low-cost overheating protection system destined for heat supply from 80 to 120°C is presented. A ventilation channel ...
Pros Parés, Alba (Date of defense: 2012-02-06)
One alternative to overcome the main drawbacks of plain concrete in tension (its brittleness and weakness) is Steel Fiber Reinforced Concrete (SFRC), a technique introduced in the 70's, which consists of adding steel fibers ...
Escudero Torres, Cuauhtémoc (Date of defense: 2015-07-13)
The numerical simulation in the field of civil engineering, while widely used in structural design, has not benefited from the full potential offered by new technologies for the analysis and design of composite materials ...
Bohigas Nadal, Oriol (Date of defense: 2013-05-10)
This thesis develops general solutions to two open problems of robot kinematics: the exhaustive computation of the singularity set of a manipulator, and the synthesis of singularity-free paths between given configurations. ...
Geng, Linlin (Date of defense: 2021-01-28)
Cloud cavitation is a unwanted phenomenon taking place in many hydraulic machines which damages the surfaces of the solid walls due to the erosive aggressiveness induced by the collapse process. Therefore, it is necessary ...
Zhang, Hao (Date of defense: 2014-11-28)
This thesis focuses on the numerical investigation of the particle-fluid systems based on the Discrete Element Method (DEM). The whole thesis consists of three parts, in each part we have coupled the DEM with different ...
An, Bo (Date of defense: 2019-12-12)
The present doctoral thesis is about the numerical investigation simulated via using lattice Boltzmann method (LBM), the applications cover a large scale of subjects, including 1. Mathematical-physical equations A new ...
Colomer Rey, Guillem (Date of defense: 2006-06-26)
L'objectiu principal d'aquesta tesi es l'estudi de la transferència d'energia per radiació. Per aquest motiu, s'ha estudiat la fenomenologia bàsica de la transferencia de calor per radiació. Tenint en compte el tipus ...
Hou, Xiaofei (Date of defense: 2015-06-26)
Multiphase and multicomponent flows are frequently encountered in the cooling applications due to combined heat transfer and phase change phenomena. Two-fluid and homogeneous mixture models are chosen to numerically study ...
Crusat Codina, Laura (Date of defense: 2018-11-05)
The general objective of this thesis is the numerical representation of discrete cracks and their propagation using concepts of Configurational Mechanics, in such a way that their trajectory really corresponds to an energy ...
Zhan, Zhifeng (Date of defense: 2012-06-19)
Based on the laboratory, field and numerical results, the post-rupture strength defined firstly by Burland (1990) is verified and introduced in this thesis to describe the two-stage post-peak strain-softening characteristics ...
Wang, Yufei (Date of defense: 2022-07-11)
Geological Carbon Sequestration (GCS) plays a major role in mitigating the global warming due to the increasing concentration of CO2 in atmosphere. It is important to understand the GCS process to analyze and predict its ...
Rodríguez Prieto, Juan Manuel (Date of defense: 2014-03-06)
Metal cutting or machining is a process in which a thin layer or metal, the chip, is removed by a wedge-shaped tool from a large body. Cutting is a complex physical phenomena in which friction, adiabatic shear bands, ...
López Alonso, José Manuel (Date of defense: 2015-02-05)
Despite the large amount of research which has been conducted on turbulent flows, a full understanding of their dynamics as well as the mechanisms involved in the onset of turbulence is still missing. Experimental studies ...
Hospital Bravo, Raúl (Date of defense: 2021-07-05)
The design of offshore power stations (for wind, wave or tidal energy generation) requires assessing their environmental impact. In particular, it is of the major importance to predict the impact of the generated subsea ...
Badillo Almaraz, Hiram (Date of defense: 2012-04-16)
A multi-domain homogenization method is proposed and developed in this thesis based on a two-scale technique. The method is capable of analyzing composite structures with several periodic distributions by partitioning the ...
Hachicha, Ahmed Amine (Date of defense: 2013-09-30)
Concentrated Solar Power (CSP) technologies are gaining increasing interest in electricity generation due to the good potential for scaling up renewable energy at the utility level. Parabolic trough solar collector (PTC) ...
Pérez Foguet, Agustí (Date of defense: 2000-12-01)
La tesis se centra en el desarrollo de técnicas numéricas específicas para la resolución de problemas de mecánica de sólidos, tomando como referencia aquellos que involucran geomateriales (suelos, rocas, materiales ...
Samsó Campà, Roger (Date of defense: 2014-03-28)
Constructed Wetlands (CWs) are a wastewater treatment technology that inherits the purification potential of natural wetlands and optimizes it to comply with regulations for treated discharges. CWs have become an equally ...