Salazar González, Fernando (Date of defense: 2017-02-23)
Dam behaviour is difficult to predict with high accuracy. Numerical models for structural calculation solve the equations of continuum mechanics, but are subject to considerable uncertainty as to the ...
Petracca, Massimo (Date of defense: 2016-04-13)
Masonry is an ancient building material that has been used throughout the history, and it is still used nowadays. Masonry constitutes the main building technique adopted in historical constructions, and ...
Maidana, Manuel Augusto (Date of defense: 2007-09-14)
En esta tesis se ha desarrollado y validado un modelo tridimensional de circulación costera en elementos finitos capaz de simular una región limitada del océano. La escala de longitud de las aplicaciones ...
Londoño-Linares, Juan Pablo (Date of defense: 2016-02-03)
The available literature on Landslide Risk Assessment is less than the available on Hazard zonation topics. A reason is the inherent difficult to develop quantitative landslide risk assessment; this ...
Irazábal González, Joaquín (Date of defense: 2017-10-06)
The development of high-speed train lines has increased significantly during the last twenty-five years, leading to more demanding loads in railway infrastructures. Most of these infrastructures were ...
Sánchez Calderón, Luis Alberto (Date of defense: 2018-01-16)
A system that attempts to find cracks in a RGB picture of a concrete beam, measure the cracks angles and widths; and classify crack patterns in 3 pathologies has been designed and implemented in the ...
Alvarado Bueno, Mauricio (Date of defense: 2018-04-23)
Risk associated with landslides of natural or man-made origin depends on the prediction of the post-failure behaviour of the mobilized mass. Numerical models capable of integrating the landslide geometry ...
Marzeddu, Andrea (Date of defense: 2016-04-19)
The aim of this work is the study of laboratory effects on the measurement of wave impact induced loads on rigid maritime structures. A high number of experiments (more then 4000 using regular wave ...
Zou, Xi (Date of defense: 2018-03-12)
Numerical simulation tools are generally used in all modern engineering fields, especially those having difficulties in performing large number of practical experiments, such as biomechanics. Among the ...
Khadivipanah, Peiman (Date of defense: 2022-02-03)
The main objective of this thesis is to describe and implement a rate-dependent (viscoplastic) constitutive equations for copper based canister using a single internal state variable and use it for ...