Mostrando ítems 71-80 de 141
Ahmad, Shamshad (Fecha de defensa: 2017-04-06)
The thesis topic is located in the domain of numerical simulation of laminar flames. The principal aim of the presented research is the study of numerical techniques for the multidimensional simulation ...
Hachicha, Ahmed Amine (Fecha de defensa: 2013-09-30)
Concentrated Solar Power (CSP) technologies are gaining increasing interest in electricity generation due to the good potential for scaling up renewable energy at the utility level. Parabolic trough ...
Morell Bennasser, Nicolás (Fecha de defensa: 2018-12-17)
Suspended monolayer transition metal dichalcogenides (TMD) aremembranes that combine ultralow mass and exceptional optical prop-erties, making them intriguing materials for opto-mechanical applica-tions. ...
Dabbagh, Firas (Fecha de defensa: 2017-09-06)
Without fluid turbulence, life might have rather different look. The atmosphere and oceans could nearly maintain a much larger temperature differences resulting in ultimate heating or cooling to the ...
Quintero Perez, Guillermo (Fecha de defensa: 2019-07-08)
For the production of representative noise maps, a large amount of information is necessary, which includes, among others, on-site measurements of environmental noise. Thus, for noise maps based on ...
Zou, Xi (Fecha de defensa: 2018-03-12)
Numerical simulation tools are generally used in all modern engineering fields, especially those having difficulties in performing large number of practical experiments, such as biomechanics. Among the ...
Liu, Chaoren (Fecha de defensa: 2015-10-07)
Dynamic mechanical analysis (DMA) is often used to explore the relaxation dynamics of metallic glasses (MGs). Secondary relaxations in metallic glasses appear as an excess wing, as a shoulder of the ...
Macía Rey, Adrián (Fecha de defensa: 2015-02-13)
A microscopic description of the many-body properties of anisotropic homogeneous gases of bosonic dipoles in two dimensions is presented and discussed. By changing the polarization angle with respect ...
Ferrer González, Pere Josep (Fecha de defensa: 2015-07-17)
Over the last decades, Metamaterials (MTMs) have caught the attention of the scientific community. Metamaterials are basically artificially engineered materials which can provide unusual electromagnetic ...
Rodríguez Prieto, Juan Manuel (Fecha de defensa: 2014-03-06)
Metal cutting or machining is a process in which a thin layer or metal, the chip, is removed by a wedge-shaped tool from a large body. Cutting is a complex physical phenomena in which friction, adiabatic ...