Lucentini, Ilaria (Date of defense: 2021-11-05)
Due to the problems associated with the generation and storage of hydrogen in portable applications, the use of ammonia fer the on-site production of hydrogen through its catalytic decomposition has ...
Erencia Millán, Marisa (Date of defense: 2017-02-01)
The fabrication of scaffolds materials with the ability to mimic the structural and functional properties of extracellular matrix is one of the most important points of interest into the tissue engineering ...
Higuera Cobos, Oscar Fabián (Date of defense: 2013-07-12)
Muestras de cobre electrolítico (ETP) y refinado al fuego (FRHC) previamente recocidas durante 30 minutos a una temperatura de 600 ºC, fueron sometidas a presión en canal angular de sección constante ...
Muñoz Bolaños, Jairo Alberto (Date of defense: 2016-07-21)
Ultrafine grain size Armco iron has been obtained through severe plastic deformation through equal channel angular pressing (ECAP) at room temperature, using a die with interna! angle et> = 90 º, and ...
Acevedo Cabello, Jorge Luís (Date of defense: 2013-02-08)
Se desarrolla un estudio numérico-experimental de la microestructura de solidificación y la segregación en palanquillas de aceros hipoeutectoides fabricadas con el proceso de colada continua. Un programa ...
Molins Delgado, Daniel (Date of defense: 2017-12-01)
In this PhD. Thesis the results of eleven studies about the presence, distribution, and effects of personal care products (PCPs) in the environment are presented with the intention of giving a consolidated ...
Cifuentes López, Alejandro (Date of defense: 2023-01-19)
(English) This thesis focuses on the study of the catalytic production of hydrogen from methanol and water. Catalytic production is carried out in a catalytic membrane reactor which manages to produce ...
López Hernández, Arianne (Date of defense: 2023-12-20)
(English) Getting to give added value in the different products that are nowadays in the market has not been easy. Since many years ago we have worked on the addition of fragrances in different articles. ...
Lorente Soteras, Itzel (Date of defense: 2023-09-14)
(English) One of the main goals of the powder metallurgical (PM) industry has been to develop powders that have favourable handling, geometrical and optimal metallurgical properties. Currently, there ...
Macías García, Ana Isabel (Date of defense: 2022-11-08)
(English) In this thesis, the ability to refine the grain size of a low carbon steel (deep drawing quality, DDQ) was studied by means of two different techniques of Severe Plastic Deformation (SPD). ...