Aparicio Bádenas, Conrado (Date of defense: 2005-04-15)
El éxito clínico de los implantes dentales, fabricados en titanio comercialmente puro (Ti c.p.), está basado en la consecución de la osteointegración, es decir, la conexión directa estructural y funcional ...
Yang, Jing, 1988- (Date of defense: 2016-05-31)
This thesis assesses the influence of substrate surface integrity on different mechanical (flexural strength and contact damage resistance under spherical indentation) and tribological (scratch resistance ...
Yalamanchili, Phani Kumar (Date of defense: 2016-11-09)
Physical vapor deposited hard coatings comprised of cubic (c) transition metal (TM)-Al-N, and (TM)-Si-N are the current work horse materials for a large number of metal cutting and wear resistant ...
Mata Burgarolas, Marta (Date of defense: 2004-12-13)
Aquesta tesi proporciona un marc per l'anàlisi dels experiments d'indentació. En primer lloc, s'estén el concepte dels règims de deformació al contacte a materials metàl·lics que presenten efectes ...
Abt, Tobias (Date of defense: 2014-07-11)
The thesis at hand deals with the modification of cyclic butylene terephthalate (CBT) with the aim to improve its final properties. CBT polymerizes in an entropically-driven ring-opening polymerization ...
Casas Quesada, Casimir (Date of defense: 2015-01-21)
In this thesis, the microstructure and mechanical properties of bulk samples manufactured with nanocrystalline iron powder are analyzed. This iron powder was obtained by a severe plastic deformation ...
Wang, Liang (Date of defense: 2015-12-16)
Foam-like aerogels based on biodegradable polymers and sodium montmorillonite (Na+-MMT) clay were prepared through an environmentally friendly freeze-drying process. Both synthesized and bio-based ...
Wang, Lei (Date of defense: 2016-12-16)
In the current thesis, two TWIP steels with different chemical composition were successfully subjected to Severe Plastic Deformation with Equal Channel Angular Pressing (ECAP) at warm temperature (300°C), ...
Gómez Monterde, Javier (Date of defense: 2017-02-17)
The present PhD thesis is framed within the Industrial Doctorate Plan promoted by the Generalitat de Catalunya and has been developed in cooperation between the Universitat Politècnica de Catalunya-Ba ...