Now showing items 21-40 of 84
Madadi, Hojjat (Date of defense: 2014-01-17)
Recently, the emergence of lab-on-a-chip devices has seen in a variety of applications especially in clinical analys is and diagnostics. ln particular the lack of suitable microdevices for separation of plasma from whole ...
Martínez González, Eva (Date of defense: 2014-01-30)
This thesis is focused on the calibration of the Acoustic Emission (AE) technique to detect and identify damage mechanisms in tool steels. The AE measurement procedure has been calibrated for two mechanical tests: fracture ...
Clot Razquin, Arnau (Date of defense: 2014-02-20)
This thesis presents a three-dimensional dynamic model of a double-deck circular tunnel embedded in a full-space. The model uses the receptance method to obtain the response of the complete structure from the response of ...
Català, Pau (Date of defense: 2014-05-06)
This thesis presents the dynamic study of conjugate cam mechanisms with rollers follower and translational movement, to design them with the aim of retard the surface fatigue failure in the rollers. The premature failure ...
Minguella i Canela, Joaquim (Date of defense: 2014-07-16)
The present work composes a contribution towards the Construction of World models for its implementation in 'Agile Manufacturing Architectures', aiming to take a step further the control programs for manufacturing systems, ...
Zougari, Ayoub (Date of defense: 2014-10-17)
In the last decades, the problem of the vibrations and the noise generated by the rolling and the undulatory wear has been approached by multiple research groups. These groups have developed studies with the intention of ...
Mohammadi, Mahdi (Date of defense: 2015-04-10)
Lab-on-a-Chip (LOC) integrated microfluidics has been a powerful tool for new developments in analytical chemistry. These microfluidic systems enable the miniaturization, integration and automation of complex biochemical ...
Gómez Gras, Giovanni (Date of defense: 2015-04-17)
The aim of this thesis is studying and characterizing a ball burnishing process assisted with vibrations. By introducing vibrations in the overall process, results are enhanced if compared to the ones derived from a ...
Farré Lladós, Josep (Date of defense: 2015-04-28)
Manufacturers of wind turbines have observed a new phenomenon that appears in high power wind turbines: excessive wear in the teeth located at 0º in the pitch bearing. In order to design more efficient wind turbines, ...
Sánchez Egea, Antonio José (Date of defense: 2016-01-26)
This thesis presents a study on the variation of the mechanical properties of some materials. These variations are registered for processes as bottom bending, wire drawing or round turning, which are performed under high ...
Herranz Alvarez, Juan F. (Date of defense: 2016-02-29)
The particle production of an accelerator is characterised by the accelerated species of particles, by their number and energy. The particle rate is determined by the production cross section, a natural constant and the ...
Toumanidou, Themis (Date of defense: 2016-11-14)
The human spine provides mechanical support to the trunk while it protects the spinal cord and nerves from the external loads transferred during daily activities. Such loads are largely controlled by the spine muscles and ...
Hameed, Saqib (Date of defense: 2017-09-22)
The thesis presented is performed with the aim of studying the effect of electropulses (EPs) in machining processes such as drilling and round turning processes for different materials. When the EPs of short duration are ...
Lores Garcia, Eduard (Date of defense: 2017-12-22)
Machines and mechanisms can usually exhibit a vibratory behavior during operation since they are formed by deformable solids of non-negligible mass and non-rigid joints. This oscillatory behavior can be shown for transient ...
Jerez Mesa, Ramón (Date of defense: 2018-03-02)
This dissertation is an experimental research project into the mechanical effects of the ultrasonic vibration-assisted ball burnishing process on the surface integrity of surfaces machined through ball-end milling. Due to ...
Ortiz Marzo, José Antonio (Date of defense: 2018-11-23)
The production of components of the moulds and dies sector is increasingly demanding. On the one hand, a better manufacturing quality is required, that requires, among other aspects, the improvement of the surface finish, ...
Morales Planas, Sergio (Date of defense: 2019-04-09)
This thesis is the result of collaboration between the university (UPC) and the company (Fluidra SA) within the framework of the program of industrial doctorates of the agency AGAUR (Agencia de Gestión de Ayudas Universitarias ...
Muguruza Blanco, Asier (Date of defense: 2019-04-10)
In recent decades, there has been a digitalization in all areas and faetones have not been been exempt from of this phenomenon, incorporating CAD I CAM I CAE systems, as well as automatas, robots, and real-time control ...
Sanchís Estruch, Ricard (Date of defense: 2019-07-16)
One of the main problems presented due to the defects in the profiles of the railway wheels is the generation of vibrations and noise, and their propagation towards the environment. Defects in wheels, such as surface pitting ...
Ghangale, Dhananjay (Date of defense: 2019-07-19)
This thesis presents a methodology for assessing induced ground-borne vibration due to Underground railway infrastructures in the context of an urban environment. The methodology is based on a comprehensive numerical ...