Departament de Màquines i Motors Tèrmics: Enviaments recents
Ara mostrant els elements 41-60 de 75
Numerical investigation of particle-fluid interaction system based on discrete element method
This thesis focuses on the numerical investigation of the particle-fluid systems based on the Discrete Element Method (DEM). The whole thesis consists of three parts, in each part we have coupled the DEM with different ...
Study of the exfoliation process in epoxy-clay nanocomposites
Cured epoxy resins are highly cross-linked polymers which are increasingly important in high performance engineering field due to the stiffness, high strength, heat resistance and solvent resistance. However one major ...
Numerical simulation of multiphase flows : level-set techniques
This thesis aims at developing numerical methods based on level-set techniques suitable for the direct numerical simulation (DNS) of free surface and interfacial flows, in order to be used on basic research and industrial ...
Three-dimensional numerical simulation of fluid flow and heat transfer in fin-and-tube heat exchangers at different flow regimes
This thesis aims at unifying two distinct branches of work within the Heat Transfer Technological Center (CTTC). On one side, extensive experimental work has been done during the past years by the researchers of the ...
Numerical simulation of multiphase immiscible flow on unstructured meshes
The present thesis aims at developing a basis for the numerical simulation of multiphase flows of immiscible fluids. This approach, although limited by the computational power of the present computers, is potentially very ...
Numerical and experimental study of a flat plate collector with honeycomb transparent insulation and overheating protection system
In this thesis a flat plate collector (FPC) with plastic transparent insulation materials (TIM) and a low-cost overheating protection system destined for heat supply from 80 to 120°C is presented. A ventilation channel ...
Numerical modelling of a parabolic trough solar collector
Concentrated Solar Power (CSP) technologies are gaining increasing interest in electricity generation due to the good potential for scaling up renewable energy at the utility level. Parabolic trough solar collector (PTC) ...
Parallel algorithms for computational fluid dynamics on unstructured meshes
La simulació numèrica directa (DNS) de fluxos complexes és actualment una utopia per la majoria d'aplicacions industrials ja que els requeriments computacionals son massa elevats. Donat un flux, la diferència entre els ...
Analysis of night-time climate in plastic-covered grenhouses
Este trabajo analiza el clima nocturno del invernadero. EL objeto del estudio es el invernadero de plástico sin calefacción, cuyo clima se estudia utilizando modelos CFD, modelos basados en los balance de energía (ES) y s ...
Numerical resolution of turbulent flows on complex geometries.
This thesis aims at developing a numerical methodology suitable for the direct numerical simulation (DNS) and large-eddy simulation (LES) of turbulent flows in order to be used in complex flows, currently encountered in ...
Numerical analysis and experimental studies of vapour compression refrigerating systems: special emphasis on different cycle configurations
The aim of this work is to study the thermal behavior and fluid-dynamic systems, vapor compression refrigeration and its components (heat exchangers, expansion devices, compressors, connecting pipes, pumps and pressure ...
Performance indicators for the dynamics modeling and control of PEMFC systems
Society is gradually becoming aware that the current energy industry, based on the use of fossil fuels, is inefficient, highly polluting and has a finite supply. Within the scientific community, there are indications ...
Numerical simulation and experimental validation of vapor compression refrigerating systems: special emphasis on natural refrigerants
The aim of this work is to study the thermal and fluid-dynamic behavior of vapor compression refrigerating systems and their constitutive elements (heat exchangers, expansion devices, compressors and connecting tubes) ...
Suitability of different RANS models in the description of turbulent forced convection flows: application to air curtains
The main motivation of this thesis is the analysis of turbulent flows. Turbulence plays an important role in engineering applications due to the fact that most flows in industrial equipment and surroundings are in turbulent ...
Subenfriadores criogénicos nitrógeno: aportación a la metodología para el diseño
Se establece la metodología, incluyendo la formulación necesaria, para el diseño térmico de subenfriadores criogénicos n2(i)-n2(i), observando en todo momento criterios de optimización para con los diferentes parámetros y ...
Numerical simulation of the thermal and fluid dynamics behaviour of liquid-vapour two-phase flow in evaporators and condensers
Un estudio numérico del comportamiento térmico y fluido-dinámico de flujos bifásicos, liquido-gas, en conductos es presentado. El análisis numérico es basado en dos diferentes modelos. El primer modelo es conocido como ...
Modelización del cambio de fase sólido-líquido. Aplicación en sistemas de acumulación de energía térmica
En este trabajo se ha realizado una simulación numérica detallada del fenómeno de cambio de fase sólido-líquido, por ser esta fenomenología de gran interés en diferentes áreas industriales. <br/>La simulación realizada ...
Simulation of heat and mass transfer phenomena in the critical elements of H2O-LiBr absorption cooling machines. Experimental validation and application to design
Degut a la tendència a l'increment del preu de la energia, i el seu ús cada cop més estès per aire condicionat en els paisos desenvolupats, els sistemes de refrigeració basats en energia solar tenen cada cop més atractiu. ...
Heat transfer and fluid-dynamics in double and single skin facades
Una proporción muy importante del presupuesto energético total de los países europeos es destinado al consumo energético del sector de la edificación, tanto en el ámbito doméstico como terciario. Debido a que esta tendencia ...
Numerical methods for radiative heat transfer
L'objectiu principal d'aquesta tesi es l'estudi de la transferència d'energia per radiació. Per aquest motiu, s'ha estudiat la fenomenologia bàsica de la transferencia de calor per radiació. Tenint en compte el tipus ...
