Contribució a l’adaptació a l'EEES d’assignatures de tecnologia electrònica : un mètode sistemàtic

Author

Robert Sanxis, Francesc Josep

Director

Valero García, Miguel

Codirector

Riu Costa, Pere J. (Pere Joan)

Date of defense

2016-01-29

Pages

324 p.



Department/Institute

Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica

Abstract

Learning specific knowledge and developing cross-curricular competencies under the new frame of the European Higher Education Area (EHEA), is a problem not yet solved by teaching practices based on traditional instructional methodologies. The objective of the thesis consists of designing and validating a systematic learning model based on active methodologies that allows the adaptation of courses in the area of electronic technology, hitherto organised in a traditional fashion, to the EHEA requirements. The proposed instructional method, organised in five sections (learning objectives, problem-based learning activities and study time planning, cooperative learning, formative assessment, and reflection on the teaching/learning process), integrates the specific content and the cross-curricular competencies corresponding to the course. Four hypotheses are considered to start the research, which after the experimentation and the examination of the results are successfully validated. First: active learning as we propose it, allows that more students reach an acceptable level of subject knowledge, with the corresponding increase of academic performance. The data analysis on the courses in which teaching experiences were carried out, allows reaching the conclusion that our methodology increases significantly the performance, while at the same time more students achieve higher scores. Second: the active and systematic methodology proposed in this research is more efficient than traditional instruction with respect to the achievement of content and cross-curricular skills as they are defined in the EHEA. In other words, students learn meaningfully the specific content of the course and unfold efficiently the generic competencies associated with the studies when immersing them in our active learning environment organised systematically to solve problems and projects. To accept this hypothesis, evidences archived in student learning portfolios are presented; we have documented skills such as teamwork, problem solving, efficient oral and written communication and the use of information resources to acquire specific content. Furthermore, teaching content through English has promoted the use and understanding of this third language. Third: The proposed systematic learning model based on active methodologies can be successfully applied in courses of the area of electronic technology in bachelor degrees, and equally be effective in other branches of engineering studies. The materials produced teaching basic and advanced subjects in the area of electronic technology demonstrate the successful adaptation to the EHEA. We have disseminated for many years under the umbrella of the Research and Innovation in Learning Methodologies (RIMA) group of the Institute of Education Sciences (ICE), our teaching experiences on electronic technology courses in seminars, conferences and publications, which in itself represents an explicit validation of our methodology. Discussion and peer review have become key factors in enhancing procedures and finding solutions. Fourth: The proposed model demands a workload that can be permanently accepted by university lecturers, thus making possible to widespread teaching of content and generic competencies throughout university education. Data from our experiences show that the coordinator can start a course based in our methodology employing the usual teaching time and the other professors can follow up without interfering other academic tasks


L'adquisició de coneixements i competències genèriques segons el marc de l'EEES és un problema que no ha resolt la pràctica docent basada en metodologies instruccionals tradicionals. L'objectiu d'aquesta tesi consisteix a dissenyar i validar un model d'aprenentatge sistemàtic basat en metodologies actives que permeti adaptar al nou model docent de l'EEES assignatures de l'àrea de tecnologia electrònica organitzades de forma tradicional. El mètode instruccional, organitzat en cinc punts (objectius, activitats PBL i planificació del temps d’estudi, aprenentatge cooperatiu, avaluació formativa i reflexió sobre el procés docent), integra els continguts específics i les competències genèriques assignats a cada matèria. Per a elaborar la tesi partim de quatre hipòtesis, que es validaran atenent als resultats. Primera: l'aprenentatge actiu, tal com el proposem, permet assolir un nivell de coneixements acceptable a molts més estudiants, amb el consegüent augment del rendiment acadèmic de les matèries. L'anàlisi de les dades del conjunt d'assignatures sobres les quals s'han treballat experiències docents permet concloure que el sistema d'aprenentatge proposat millora substancialment el nombre d'aprovats i el d'estudiants que obtenen millors qualificacions. Segona: el mètode sistemàtic d'aprenentatge actiu que proposem és més eficaç que l'ensenyament tradicional pel que fa a l'adquisició de coneixements específics i competències genèriques tal com es defineixen a l'EEES. És a dir, els estudiants aprendran significativament els coneixements específics i desplegaran eficientment les habilitats genèriques pròpies de la titulació si els mantenim immersos en l'entorn d'aprenentatge actiu planificat sistemàticament per resoldre els problemes i projectes que proposem. Per acceptar aquesta hipòtesi hem adjuntat evidències recollides en els portafolis d'aprenentatge dels estudiants i hem documentat habilitats de treball en grup, de resolució de problemes i projectes, de bones pràctiques d'expressió oral i escrita i d'ús solvent de recursos d’informació per a l'adquisició de coneixements de l'àrea. A més, els indicadors mostren que hem incentivat l'ús de l'anglès en convertir-lo en llengua vehicular de les matèries. Tercera: el mètode sistemàtic d’aprenentatge actiu proposat s'aplica perfectament a l'àmbit de les assignatures de tecnologia electrònica dels estudis de grau i igualment serà de gran utilitat en altres àrees de coneixement d'estudis d'enginyeria. Els materials generats en assignatures de tecnologia electrònica bàsiques i avançades demostren que hem resolt amb escreix l'adaptació a l'EEES. En el context del grup RIMA de l'ICE hem difós durant anys les nostres experiències en assignatures de tecnologia electrònica en jornades, cursos, seminaris, articles i publicacions, cosa que comporta per ella mateixa una validació explícita del mètode. La crítica i la revisió per part dels nostres companys han esdevingut factors clau a l'hora de cercar solucions i afinar els procediments. Quarta: el mètode d’aprenentatge actiu que proposem implica una càrrega docent assumible de forma permanent pels professors universitaris i, per tant, la seva implantació permet confrontar adequadament els reptes de l’ensenyament superior pel que fa a l’adquisició de coneixements i desplegament de competències. Les dades aportades demostren que un professor coordinador pot iniciar una matèria amb la metodologia sistemàtica proposada dedicant-hi les hores estipulades en docència i l’equip de professors pot continuar-la sense interferir en les altres tasques acadèmiques.

Subjects

378 - Higher education. Universities. Academic study; 621.3 Electrical engineering

Knowledge Area

Àrees temàtiques de la UPC::Enginyeria electrònica

Documents

TFJRS1de1.pdf

11.14Mb

 

Rights

L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-sa/3.0/es/
L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-sa/3.0/es/

This item appears in the following Collection(s)