Estudio experimental de geopolímeros de arcillas en función de la resistencia mecánica

Author

Calderón Peñafiel, Juan Carlos

Director

Avellaneda, Jaume

Rosell, Joan Ramon

Date of defense

2019-06-20

Pages

399 p.



Department/Institute

Universitat Politècnica de Catalunya. Departament de Tecnologia de l'Arquitectura

Abstract

Considering that architecture and construction play an active part in the current global warming problems, there is a need to develop resistant construction materials with coherent environmental characteristics. The main objective of this research was to test the principles of geopolymerization in the manufacture of experimental polymerized-clay bricks and to improve the mechanical characteristics of the bricks, while maintaining low levels of embodied energy. The research included the state of the art of clays, geopolymers and an experimental study that included the design, manufacturing, characterization and analysis of raw materials and experimental bricks based on clay. The optimized polymerized-clay bricks showed compressive strengths between 20-30MPa with 80-90% less environmental impact than common fired bricks. The results showed that the principles of geopolymerization can be applied in the manufacture of natural clay materials with success, increasing mechanical performance and maintaining low levels of embodied energy.


Considerando que la arquitectura y la construcción forman parte activa en la problemática medioambiental global, existe la necesidad de desarrollar materiales de construcción resistentes con características ambientales coherentes. El objetivo principal de esta investigación fue probar los principios de geopolimerización en la fabricación de bloques experimentales de arcilla natural para dotarlos de mejores características mecánicas, manteniendo niveles bajos de energía incorporada. La investigación incluyó el estado del arte de las arcillas, geopolímeros y un estudio experimental que abarcó el diseño, fabricación, caracterización y análisis de materiales precursores y bloques experimentales a base de arcilla. Los bloques optimizados mostraron resistencias a compresión entre 20-30MPa con 80-90% menos impacto ambiental que los ladrillos de arcilla cocida. Los resultados evidenciaron que los principios de geopolimerización pueden ser aplicados en la fabricación de materiales de arcilla natural con éxito, incrementando el desempeño mecánico y manteniendo niveles bajos de energía incorporada.

Keywords

Geopolymers; Polymerized-clay bricks; Compressive strength; Embodied environmental impact; Geopolímeros; Bloques de arcilla polimerizada; Resistencia a compresión; Impacto ambiental incorporado

Subjects

69 - Building (construction) trade. Building materials. Building practice and procedure; 72 - Architecture

Knowledge Area

Àrees temàtiques de la UPC::Arquitectura

Documents

TJCCP1de2.pdf

31.40Mb

TJCCP2de2.pdf

38.44Mb

 

Rights

L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-nd/4.0/
L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-nd/4.0/

This item appears in the following Collection(s)