Assessment of different strategies to reduce environmental fungicide contamination in vineyards

Author

Ortega Rioja, Paula

Director

Gil Moya, Emilio

Codirector

Matamoros Mercadal, Víctor

Date of defense

2024-03-12

Pages

151 p.



Department/Institute

Universitat Politècnica de Catalunya. Departament d'Enginyeria Agroalimentària i Biotecnologia

Doctorate programs

DOCTORAT EN TECNOLOGIA AGROALIMENTÀRIA I BIOTECNOLOGIA (Pla 2013)

Abstract

(English) The use of plant protection products (PPP) has become an essential tool in agriculture to achieve the minimum requirements of quality and quantity of food demanded by consumers. Moreover, due to its repeated use throughout the campaign, it is one of the most complex strategies in agriculture, due to the concern for achieving products free of pests and diseases, free of residues, and avoiding environmental risks. The recently published Farm to Fork Strategy aims at the difficult task of reducing the amount of hazardous pesticides used by 50 % by 2030. From the moment this strategy was published, it gained importance the implementation of improvements in application techniques to increase the effectiveness and efficiency of treatments. This is especially relevant in specialty crops such as orchards or vineyards, where the use of PPP is very high, compared with the case of field crops. In addition, this type of crops is characterised by a high degree of spatial variability in terms of the canopy structural characteristics, which makes it difficult to achieve a safe and effective application of pesticides. In this sense, variable rate application technology can reduce the effect of intra-plot variability, adjusting the volume rate to the canopy characteristics at each point, achieving a much more rational distribution of the plant protection product and more adjusted to the canopy than those carried out homogeneously. Currently, three types of variable rate application technology are known: 1) based on real-time sensors, 2) based on prescription maps, and 3) a combination of the two previous ones. Although variable rate application systems based on real-time sensors eliminate the need for prior knowledge of the crop, this technology has not been practically implemented in the viticulture sector. This contrasts with the adoption of vegetation maps acquired using remote sensing, which has been in commercial use for vineyard management for more than ten years. Among the management operations in which vegetation maps can have a greater impact is that of plant protection application, which is currently at an incipient level of implementation. For this reason, the main objective of this doctoral thesis, structured in three research publications, is to adapt and incorporate variable application technologies based on prescription maps to improve the efficacy and efficiency of treatments in the vineyard. The first research publication of the thesis was focused on the design, fine-tuning and field validation of a prototype of variable rate application based on prescription maps for vineyards. The article includes the whole process of variable map-based spraying, from the creation of the prescription map to obtaining the actual application map. The obtained results showed the possibility of saving up to 47.3 % of the amount of PPP concerning conventional treatment, demonstrating that it is possible to adapt, with the corresponding changes and adjustments, the available technology to the specific case of the vineyard. The main objective of the second research publication was the evaluation of the quality of the distribution of PPP on the vines and the evaluation of the biological efficacy of the applications during a complete campaign of treatments. During the research, the degree of adoption of the variable rate application system on a commercial farm and the possibility of implementing the technology in its annual treatment program were evaluated. A total of 28 treatments were carried out using the map based variable rate technology, obtaining in all treatments and vigour zones a coverage between 20 and 40 %, considered adequate values to guarantee pest/disease control in any spraying process. In terms of biological efficacy, the same levels of control were maintained as in the conventional treatments, and no significant differences were found between them. Although it was demonstrated that the variable rate application system allowed.


(Español) El cultivo de la vid tiene una rica historia en la región europea. Para garantizar su producción, se ha confiado tradicionalmente en el uso de productos fitosanitarios (PPP) para el control de plagas y enfermedades. Uno de los mayores retos a los que se enfrenta el viñedo es Plasmopara viticola, comúnmente conocido como mildiu. Tradicionalmente, para combatir esta enfermedad se han utilizado fungicidas a base de cobre. Aunque hoy en día también existen productos de síntesis química y de origen biológico, el cobre sigue siendo la opción más utilizada. Sin embargo, se ha observado que su uso prolongado puede causar contaminación ambiental, especialmente en el suelo y las aguas. Por ello, el uso de productos fitosanitarios en la agricultura es actualmente motivo de gran preocupación debido a los riesgos que plantean tanto para el medio ambiente como para la salud humana. Su uso prolongado y, en ocasiones, abusivo o descuidado, ha hecho saltar las alarmas en la Unión Europea. Este proyecto de investigación doctoral se ha centrado en la búsqueda de soluciones alternativas para reducir la contaminación causada por fungicidas en la vid desde diferentes ángulos, desde la mitigación hasta la prevención. En primer lugar, la tesis doctoral explora el impacto de los cultivos de cobertura en la reducción de la lixiviación de plaguicidas a las aguas subterráneas y el papel de las franjas de protección vegetadas en la reducción de la escorrentía a los cursos de agua superficiales. En segundo lugar, evalúa el potencial de la vegetación para degradar estos productos en distintos medios edáficos, incluidos sus productos de transformación. En tercer lugar, este trabajo implica el desarrollo y la evaluación de un producto microencapsulado de cobre que mejora la deposición y, por tanto, reduce la cantidad de cobre necesaria en los tratamientos fitosanitarios. Por último, en la cuarta fase, se evalúan los factores que influyen en la adopción por parte de los agricultores de los biopesticidas como producto alternativo a los fungicidas de cobre. Este trabajo demuestra que las tres alternativas propuestas se han mostrado como estrategias potenciales para reducir la contaminación. Los hallazgos presentados en esta tesis demuestran resultados prometedores. Los cultivos de cobertura y las bandas de vegetación son estrategias eficaces para reducir la contaminación de las aguas subterráneas y del suelo resultante de la aplicación de fungicidas, debido a su capacidad para degradar los compuestos contaminantes. La vegetación acelera la cinética de degradación de los fungicidas en el suelo y de sus productos de transformación. El producto microencapsulado evaluado, permite aumentar la eficacia durante la aplicación en pulverización, generando una reducción potencial de cobre. Asimismo, se ha detectado que el conocimiento de la legislación del cobre es crucial para la introducción de productos fitosanitarios biológicos como alternativa a los fungicidas químicos o de cobre. Todas estas estrategias pueden combinarse para lograr un impacto aún mayor en diferentes niveles de actividades de aplicación de pulverización. Es necesario seguir investigando para lograr el menor impacto ambiental y producir alimentos más seguros de forma más sostenible.

Keywords

Buffer zones; Copper; Cover crops; Crop protection; Fungicides; Microencapsulation; Sustainability; Vineyard; Cobre; Cultivos de cobertura; Fungicidas; Microencapsulación; Protección de cultivos; Sostenibilidad; Viñedos; Zonas tampón; Coure; Cobertes vegetals; Fungicides; Microencapsulació; Protecció de cultius; Sostenibilitat; Vinyes; Zones tampó

Subjects

632 - Plant damage, injuries. Plant diseases. Pests, organisms injurious to plants. Plant protection; 634 - Fruit growing

Knowledge Area

Àrees temàtiques de la UPC::Enginyeria agroalimentària

Note

Tesi amb menció de Doctorat Internacional

Tesi en modalitat de compendi de publicacions

Documents

TPOR1de1.pdf

4.915Mb

 

Rights

ADVERTIMENT. Tots els drets reservats. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs.

This item appears in the following Collection(s)