Català, Pau (Date of defense: 2014-05-06)
This thesis presents the dynamic study of conjugate cam mechanisms with rollers follower and translational movement, to design them with the aim of retard the surface fatigue failure in the rollers. The ...
Martínez González, Eva (Date of defense: 2014-01-30)
This thesis is focused on the calibration of the Acoustic Emission (AE) technique to detect and identify damage mechanisms in tool steels. The AE measurement procedure has been calibrated for two ...
Zougari, Ayoub (Date of defense: 2014-10-17)
In the last decades, the problem of the vibrations and the noise generated by the rolling and the undulatory wear has been approached by multiple research groups. These groups have developed studies ...
Sánchez Egea, Antonio José (Date of defense: 2016-01-26)
This thesis presents a study on the variation of the mechanical properties of some materials. These variations are registered for processes as bottom bending, wire drawing or round turning, which are ...
Ortiz Marzo, José Antonio (Date of defense: 2018-11-23)
The production of components of the moulds and dies sector is increasingly demanding. On the one hand, a better manufacturing quality is required, that requires, among other aspects, the improvement of ...
Hameed, Saqib (Date of defense: 2017-09-22)
The thesis presented is performed with the aim of studying the effect of electropulses (EPs) in machining processes such as drilling and round turning processes for different materials. When the EPs of ...
Herranz Alvarez, Juan F. (Date of defense: 2016-02-29)
The particle production of an accelerator is characterised by the accelerated species of particles, by their number and energy. The particle rate is determined by the production cross section, a natural ...
Morales Planas, Sergio (Date of defense: 2019-04-09)
This thesis is the result of collaboration between the university (UPC) and the company (Fluidra SA) within the framework of the program of industrial doctorates of the agency AGAUR (Agencia de Gestión ...
Muguruza Blanco, Asier (Date of defense: 2019-04-10)
In recent decades, there has been a digitalization in all areas and faetones have not been been exempt from of this phenomenon, incorporating CAD I CAM I CAE systems, as well as automatas, robots, and ...
Lores Garcia, Eduard (Date of defense: 2017-12-22)
Machines and mechanisms can usually exhibit a vibratory behavior during operation since they are formed by deformable solids of non-negligible mass and non-rigid joints. This oscillatory behavior can ...