Now showing items 45-64 of 69
Mora, D. F. (Diego Fernando) (Date of defense: 2013-04-26)
Cementitious materials such as mortar or concrete are brittle and have an inherent weakness in resisting tensile stresses. The addition of discontinuous fibers to such matrices leads to a dramatic improvement in their ...
Otero Gruer, Fermin (Date of defense: 2016-02-09)
Most of the existing materials around us can be considered composite materials, since they are composed by several phases or components at certain spatial scale. The physical and chemical properties of composites, as occurs ...
Valdés Vázquez, Jesús Gerardo (Date of defense: 2007-10-18)
Problemas de interacciónn fluido-estructura representan hoy en día un gran desafío en diferentes áreas de ingeniería y ciencias aplicadas. Dentro de las aplicaciones en ingeniería civil, el flujo del viento y los movimientos ...
Escudero Torres, Cuauhtémoc (Date of defense: 2015-07-13)
The numerical simulation in the field of civil engineering, while widely used in structural design, has not benefited from the full potential offered by new technologies for the analysis and design of composite materials ...
Rodríguez Prieto, Juan Manuel (Date of defense: 2014-03-06)
Metal cutting or machining is a process in which a thin layer or metal, the chip, is removed by a wedge-shaped tool from a large body. Cutting is a complex physical phenomena in which friction, adiabatic shear bands, ...
Badillo Almaraz, Hiram (Date of defense: 2012-04-16)
A multi-domain homogenization method is proposed and developed in this thesis based on a two-scale technique. The method is capable of analyzing composite structures with several periodic distributions by partitioning the ...
Comellas Sanfeliu, Ester (Date of defense: 2016-02-05)
Living biological tissues are complex structures that have the capacity of evolving in response to external loads and environmental stimuli. The adequate modelling of soft biological tissue behaviour is a key issue in ...
Barbu, L. G. (Lucia Gratiela) (Date of defense: 2016-02-01)
The present thesis aims at advancing an innovative computational methodology that simulates steel and composite material fracture under cyclic loading following a phenomenological approach, with calibration from both small ...
De Mier Torrecilla, Monica (Date of defense: 2010-06-29)
La presencia simultánea de múltiples fluidos con diferentes propiedades ocurre en numerosos problemas medioambientales, procesos industriales y situaciones de la vida diaria. Algunos ejemplos son la interacción fluido-combustible ...
Diego Íñiguez, Javier (Date of defense: 2013-07-03)
Cell migration is a fundamental element in a variety of physiological and pathological processes. Alteration of its regulatory mechanisms leads to loss of adhesion and increased motility, critical steps in the initial ...
Dávalos Chargoy, César Emilio (Date of defense: 2014-06-19)
The aim of this work is to present a new procedure for modelling industrial processes that involve granular material flows, using a numerical model based on the Particle Finite Element Method (PFEM). The numerical results ...
Otín, R. (Rubén) (Date of defense: 2011-05-04)
En esta tesis se presenta una alternativa a la formulación clásica de elementos finitos basada en elementos de arista (edge elements) y las ecuaciones de Maxwell curl-curl. Este enfoque alternativo se basa en elementos ...
Yamin Lacouture, Luis Eduardo (Date of defense: 2016-01-28)
The probabilistic seismic risk assessment in terms of economic losses for building portfolios aims at the estimation of the probability distribution functions of losses. This can be done for a specific seismic event ...
Coll Sans, Abel (Date of defense: 2014-07-01)
Nowadays large part of the time needed to perform a numerical simulation is spent in preprocessing, especially in the geometry cleaning operations and mesh generation. Furthermore, these operations are not easy to automatize ...
Weyler Pérez, Rafael (Date of defense: 2000-07-17)
Uno de los principales problemas asociados a la fabricación de piezas sinterizadas se debe a la pérdida de homogeneidad en las propiedades del aglomerado obtenido durante el proceso de compactación. Por ello, es primordial ...
Flor López, Silvia de la (Date of defense: 2005-04-29)
El objetivo de este trabajo de investigación es evaluar y adaptar los modelos constitutivos existentes para la caracterización termomecánica de las aleaciones con memoria de forma de níquel-titanio (Ni-Ti) para permitir ...
Hernández Silva, Noel (Date of defense: 2010-07-12)
No es frecuente encontrar un campo donde dos ramas principales de la Física estén involucradas. La Magnetohidrodinámica es uno de tales campos debido a que involucra a la Mecánica de Fluidos y al Electromagnetismo. Aun ...
Castillo del Barrio, Ernesto (Date of defense: 2016-03-15)
The Finite Element Method (FEM) is a powerful numerical tool, that permits the resolution of problems defined by partial differential equations, very often employed to deal with the numerical simulation of multiphysics ...
Nadukandi, Prashanth (Date of defense: 2011-05-13)
We present three new stabilized finite element (FE) based Petrov-Galerkin methods for the convection-diffusionreaction (CDR), the Helmholtz and the Stokes problems, respectively. The work embarks upon a priori analysis ...
Príncipe, Ricardo Javier (Date of defense: 2008-04-21)
La descripción del flujo de fluidos involucra la solución de las ecuaciones de Navier-Stokes compresible, un problema muy complejo cuya estructura matemática no es del todo comprendida. Por lo tanto, mediante análisis ...