Mostrando ítems 11-20 de 30
Otín, R. (Rubén) (Fecha de defensa: 2011-05-04)
En esta tesis se presenta una alternativa a la formulación clásica de elementos finitos basada en elementos de arista (edge elements) y las ecuaciones de Maxwell curl-curl. Este enfoque alternativo se ...
Comellas Sanfeliu, Ester (Fecha de defensa: 2016-02-05)
Living biological tissues are complex structures that have the capacity of evolving in response to external loads and environmental stimuli. The adequate modelling of soft biological tissue behaviour ...
Badillo Almaraz, Hiram (Fecha de defensa: 2012-04-16)
A multi-domain homogenization method is proposed and developed in this thesis based on a two-scale technique. The method is capable of analyzing composite structures with several periodic distributions ...
De Mier Torrecilla, Monica (Fecha de defensa: 2010-06-29)
La presencia simultánea de múltiples fluidos con diferentes propiedades ocurre en numerosos problemas medioambientales, procesos industriales y situaciones de la vida diaria. Algunos ejemplos son la ...
Otero Gruer, Fermin (Fecha de defensa: 2016-02-09)
Most of the existing materials around us can be considered composite materials, since they are composed by several phases or components at certain spatial scale. The physical and chemical properties of ...
Mora, D. F. (Diego Fernando) (Fecha de defensa: 2013-04-26)
Cementitious materials such as mortar or concrete are brittle and have an inherent weakness in resisting tensile stresses. The addition of discontinuous fibers to such matrices leads to a dramatic ...
Hernández Silva, Noel (Fecha de defensa: 2010-07-12)
No es frecuente encontrar un campo donde dos ramas principales de la Física estén involucradas. La Magnetohidrodinámica es uno de tales campos debido a que involucra a la Mecánica de Fluidos y al ...
Coll Sans, Abel (Fecha de defensa: 2014-07-01)
Nowadays large part of the time needed to perform a numerical simulation is spent in preprocessing, especially in the geometry cleaning operations and mesh generation. Furthermore, these operations are ...
Kamram, Kazem (Fecha de defensa: 2013-06-21)
The development of efficient algorithms to understand implosion dynamics presents a number of challenges. The foremost challenge is to efficiently represent the coupled compressible fluid dynamics of ...
Rodríguez Prieto, Juan Manuel (Fecha de defensa: 2014-03-06)
Metal cutting or machining is a process in which a thin layer or metal, the chip, is removed by a wedge-shaped tool from a large body. Cutting is a complex physical phenomena in which friction, adiabatic ...