Trias Mansilla, Daniel (Date of defense: 2005-04-18)
La present tesi proposa una metodología per a la simulació probabilística de la fallada de la matriu en materials compòsits reforçats amb fibres de carboni, basant-se en l'anàlisi de la distribució ...
Sarrado Molina, Carlos (Date of defense: 2015-06-11)
The present thesis aims at developing robust numerical and experimental methods for the simulation of composite adhesive joints. Firstly, a new method for the experimental characterization of adhesive ...
Barzegar, Mostafa (Date of defense: 2022-09-26)
The use of Fibre Reinforced Polymers (FRP) composites has grown in popularity over the last few decades. They offer outstanding mechanical properties combined with a low density, making them an excellent ...
Guillamet Busquets, Gerard (Date of defense: 2016-07-11)
Departing from an emerging technology such as the spread tow thin-ply technology, in which the ply thickness can be significantly reduced, the overall purpose of this thesis is motivated by the industry ...
Sasikumar, Aravind (Date of defense: 2019-07-18)
Despite the weight savings, composite materials are vulnerable to impact loads mainly due to the alarming reduction in the compression after impact strength (CAI). This thesis exploits the potential of ...
Blanco Villaverde, Norbert (Date of defense: 2005-01-21)
La majoria de les fallades en elements estructurals són degudes a càrrega per fatiga. En conseqüència, la fatiga mecànica és un factor clau per al disseny d'elements mecànics. En el cas de materials ...
Renart Canalias, Jordi (Date of defense: 2010-09-10)
El uso de los composites en la industria aeronáutica ha experimentado un fuerte crecimiento en los últimos años debido a la utilización de componentes de composite que realizan funciones estructurales. ...
Turon Travesa, Albert (Date of defense: 2006-12-18)
Es desenvolupa una eina de disseny per l'anàlisi de la tolerància al dany en composites. L'eina pot predir el inici i la propagació de fisures interlaminars. També pot ser utilitzada per avaluar i ...
Builes Cárdenas, Cristian (Date of defense: 2023-03-20)
Transport industry, especially automotive, is one of the most pollutant in the world. Current environmental concerns demand original equipment manufacturers (OEM’s) to reduce the amount of emissions ...
Ariño Palacín, María (Date of defense: 2022-10-03)
To overcome the challenges coming from environmental impacts has been a priority for the aeronautical sector in the past years, with a special focus on reducing CO2 emissions. The fibre-reinforced ...