Now showing items 1-20 of 52
Mañosa Bover, Jofre (Date of defense: 2024-10-01)
[eng] The construction industry significantly contributes to climate change and global warming, especially due to the environmental footprint of Portland cement (PC) production, which is the second most widely used material ...
Torres Ruilova, Bismark Osmany (Date of defense: 2024-07-17)
[spa] La presente tesis doctoral se centra en el aprovechamiento sostenible de la Guadua angustifolia Kunth (GaK), una especie de bambú predominante en las regiones tropicales y subtropicales, especialmente en América ...
Majó Robles, Marc (Date of defense: 2024-07-02)
[eng] The world's energy dilemma, balancing supply and demand, finds a potential solution in energy storage technologies. Energy storage systems store excess energy during low-demand periods for later use. This approach ...
Garcia Cardona, Júlia (Date of defense: 2023-12-04)
[eng] Conventional catalysts for polymer electrolyte fuel cells are based on Pt supported on porous carbons, generally carbon blacks. However, Pt is expensive and scarce and is poisoned by CO, which is present in the ...
Saranjam, Leila (Date of defense: 2023-10-30)
[eng] A compound’s solvent−water partition coefficient (log P) measures the equilibrium ratio of the compound’s concentrations in a two-phase system: as two solvents in contact or a system of micelles in an aqueous ...
Oriol López, Roger (Date of defense: 2023-10-23)
[eng] Groundwater has been traditionally considered a reliable source of freshwater. However, the low replenishment rates and the increasing contamination due to different anthropogenic activities, such as the use of ...
Ferrer, Josep Mª (Date of defense: 2023-09-06)
[spa] Esta tesis está enfocada en la búsqueda de hitos y nuevos conceptos que permitan la mejora de un producto que actualmente está dominando el mercado en su nicho de negocio español: las tuberías de PP-RCT. La empresa ...
López Jiménez, Isabel (Date of defense: 2023-05-03)
[spa] Durante los últimos años el estudio de las aleaciones de alta entropía, o high entropy alloys (HEA), ha sido un tema en auge. Las HEA presentan de cinco a más elementos en proporción equimolar y una microestructura ...
Huete Hernández, Sergio (Date of defense: 2023-02-03)
[spa] Con el fin de desarrollar materiales de construcción más sostenibles, los cementos de fosfato de magnesio (MPC) se presentan como una prometedora alternativa al cemento Portland. En concreto, destacan en cuanto a ...
Barcelona Pons, Pol (Date of defense: 2023-01-27)
[cat] La estereolitografia (SLA) és la primera de les tecnologies de fabricació additiva desenvolupada. Aquesta consisteix en la fotopolimerització d’una resina líquida per capes mitjançant la irradiació selectiva de l’àrea ...
Martínez Prat, Berta (Date of defense: 2022-12-02)
[eng] One of the most striking phenomena of active fluids, i.e., fluids composed of self-propelled constituents, is the emergence of chaotic spatiotemporal flows. "This regime, reminiscent of inertial turbulence but happening ...
Roncero Barrero, Cristina (Date of defense: 2022-09-23)
Purely organic radical-based materials constitute a promising approach for the miniaturization of devices due to their interesting optical, electronic and magnetic properties, and are good candidates to substitute scarce ...
Svobodova, Adela (Date of defense: 2022-07-19)
For the development of more compact and efficient thermal systems, nanofluids are presented as a promising option to replace conventional heat transfer fluids. Nanofluids are a suspension of low concentration of nanoparticles ...
Macías Benalcázar, Jenifer Gabriela (Date of defense: 2022-05-20)
Los sulfuros metálicos tienen un papel fundamental en los materiales de fricción, en los que actúan como aditivos que estabilizan el coeficiente de fricción y reducen el desgaste a alta temperatura. Estas propiedades de ...
Tahghighi, Mohammad (Date of defense: 2022-01-13)
Nanoparticle self-assembly is a versatile and coherent strategy for the development of functional nanostructured materials, offering low-cost and scalable methods that can be fine-tuned for many different specific application. ...
Biserova Tahchieva, Alisiya (Date of defense: 2021-01-22)
Los diferentes grados de aceros inoxidables dúplex (DSS) se caracterizan por sus atractivas propiedades de resistencia mecánica y resistencia a la corrosión, debido a su microestructura equilibrada de ferrita (δ) y austenita ...
Maldonado Alameda, Alex (Date of defense: 2021-06-28)
Municipal solid waste incineration (MSWI) is the most widely used solution in those countries where landfilling areas are limited. Incineration allows reducing the total volume of waste (up to 90%) and generating energy ...
Quezada Reyes, Víctor Alejandro (Date of defense: 2021-01-29)
La producción chilena de cobre procede de la hidrometalurgia y la concentración; el concentrado de cobre es tratado tradicionalmente mediante pirometalurgia. De acuerdo a Cochilco, el cobre producido en el año 2019, vía ...
Blanco, Pablo Miguel (Date of defense: 2020-11-25)
I have carried out this thesis in the Biophysical Chemistry of Macromolecules and Colloids research group of the University of Barcelona. In the recent years, the research group have made significant contributions to the ...
Macià Escatllar, Antoni (Date of defense: 2020-09-04)
The research presented in this thesis contributes to the understanding of both titania and silicate nanosystems by providing new information on energetic stability and properties of nanometer sized particles using computational ...