Fast and low-cost microbial toxicity bioassays based on electrochromic electron acceptors

dc.contributor
Universitat Autònoma de Barcelona. Departament de Genètica i de Microbiologia
dc.contributor.author
Pujol Vila, Ferran
dc.date.accessioned
2017-11-09T14:35:41Z
dc.date.available
2017-11-09T14:35:41Z
dc.date.issued
2017-09-28
dc.identifier.isbn
9788449073632
en_US
dc.identifier.uri
http://hdl.handle.net/10803/456178
dc.description.abstract
This thesis proposes the use of compounds that change their colour when reduced by living cells, i.e. electrochromic electron acceptors, in the development of fast and low-cost microbial toxicity bioassays suitable for in situ analysis. Electrochromism enables the monitoring of cell respiration by simple colorimetric measurement or even with the bare eye. Thus, allowing for toxicity determination without the need for complex instrumentation. Hexacyanoferrate compounds have been selected from the wide spectrum of reported electrochromic electron acceptors due to their suitable solubility and stability. To this end, a microbial acute toxicity bioassay was developed based on metabolic reduction of ferricyanide and optical determination with standard laboratory equipment, using Escherichia coli (E. coli) as model bacterium. Interferences in the optical measurement due to biomass light scattering were minimized by dual wavelength detection at 405 nm (ferricyanide absorption and biomass scattering) and 550 nm (biomass scattering). On the other hand, modification of the refractive index (RI) of the medium until matching with refractive index of bacterial cells with (i.e. RI matching) was achieved by addition of 27% (w/v) sucrose, which reduced bacterial light scattering around 50%. The toxic impact of various compounds on E. coli was determined by analysis of ferricyanide reduction kinetics (variation of ferricyanide absorption with time) and single absorbance measurements. Kinetic analysis of bacterial ferricyanide reduction allowed for fast assays (assay time of 10 min) with half maximal effective concentrations (EC50) similar to standard methods (i.e. biolumiscence inhibition test) for organic and inorganic toxic compounds. Technological implementation of the microbial toxicity bioassay was carried out by developing a low-cost miniaturized optofluidic analysis system. The optofluidic system was composed of a poly(methyl methacrylate) (PMMA) optofluidic structure incorporating discrete auxiliary optical elements (i.e. light emitting diodes, LEDs, and detectors) and an electronic circuit enabling for subtraction of ambient light interference. The optical performance of the analytical system for ferricyanide determination was tested. It was insensitive to environmental light changes and compared favourably to commercially available instrumentation. The simplicity, portability and robustness of the analysis system make it suitable for fast and low-cost determination of toxic pollutants in situ. To reduce bioassay instrumentation requirements, we designed a low-cost solid system by trapping bacteria in hygroscopic paper matrices. E. coli cells were stably trapped on low-cost paper matrices (cellulose-based paper discs) and remained viable for long times (1 month when stored at -20 ºC). Apart of acting as bacterial carriers, paper matrices also acted as a fluidic element, allowing fluid management without the need of external pumps. Optical properties of individual paper matrices were analysed showing good comparability between them. Chromatic changes associated with bacterial ferricyanide reduction were determined by three different transduction methods, i.e. optical reflectometry, image analysis and visual inspection. Validation of the bioassay was performed by analysis of real samples from natural sources (i.e. wastewater influents/effluents and leachates from contaminated soils) using the mentioned transduction methods and the bioluminiscence inhibition test (Microtox, as standard method). Toxicity values obtained showed good agreement between them and with our reference method (70% of coincidence in toxic samples and 80% in non-toxic samples). The use of a light and inexpensive material and minimum instrumentation requirements of the bioassay make it a true low-cost method for in-situ assessment of toxic water pollution.
en_US
dc.format.extent
94 p.
en_US
dc.format.mimetype
application/pdf
dc.language.iso
eng
en_US
dc.publisher
Universitat Autònoma de Barcelona
dc.rights.license
L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.rights.uri
http://creativecommons.org/licenses/by-nc-nd/4.0/
*
dc.source
TDX (Tesis Doctorals en Xarxa)
dc.subject
Bioassajos microbians
en_US
dc.subject
Bioensayos microbianos
en_US
dc.subject
Microbial bioassays
en_US
dc.subject
Contamintants tòxics
en_US
dc.subject
Contaminantes tóxicos
en_US
dc.subject
Toxic pollutants
en_US
dc.subject
Electrónicos
en_US
dc.subject
Electrochromic
en_US
dc.subject
Electorn
en_US
dc.subject
Acceptor
en_US
dc.subject.other
Ciències Experimentals
en_US
dc.title
Fast and low-cost microbial toxicity bioassays based on electrochromic electron acceptors
en_US
dc.type
info:eu-repo/semantics/doctoralThesis
dc.type
info:eu-repo/semantics/publishedVersion
dc.subject.udc
579
en_US
dc.contributor.authoremail
ferran.pujol@uab.cat
en_US
dc.contributor.director
Mas Gordi, Jordi
dc.contributor.director
Muñoz Berbel, Xavier
dc.embargo.terms
cap
en_US
dc.rights.accessLevel
info:eu-repo/semantics/openAccess


Documentos

fpv1de1.pdf

4.687Mb PDF

Este ítem aparece en la(s) siguiente(s) colección(ones)