Institut de Robòtica i Informàtica Industrial

La Universitat Politècnica de Catalunya. Barcelona Tech (UPC) és una institució pública de recerca i d'educació superior en els àmbits de l'enginyeria, l'arquitectura i les ciències.

L’activitat dels seus campus i centres fan de la UPC un punt de referència i, en complicitat amb el teixit productiu, són agent i motor de canvi econòmic i social, en posar en valor la recerca bàsica i aplicada i transferir tecnologia i coneixement a la societat.

Els investigadors i investigadores de la UPC treballen des dels laboratoris i centres de recerca per augmentar la producció científica, valoritzar-la socialment a través de la transferència de resultats i continuar liderant projectes internacionals d’excel·lència, ja sigui a partir d’iniciatives pròpies o en col·laboració amb altres centres de recerca i universitats d’arreu del món.

Futur

Portal de la producció científica dels investigadors de la UPC.

UPCommons

Portal d'accés obert al coneixement de la UPC


Si sou doctor o doctora per la Universitat Politècnica de Catalunya i voleu publicar la vostra tesi a TDX, contacteu amb tdx@upc.edu. Per a més informació consulteu les preguntes més freqüents

Enviaments recents

Enhancing maintenance and energy efficiency in smart manufacturing processes through non-intrusive monitoring strategies 

Bermeo Ayerbe, Miguel Ángel (Data de defensa: 2022-12-02)

(English) Concern about energy efficiency has increased in the industry, mainly motivated by rising energy prices and government policies to raise awareness of environmental impact. For this reason, this thesis is dedicated ...

LPV lateral control of autonomous and automated vehicles 

Medero Borrell, Ariel (Data de defensa: 2023-09-28)

(English) It is expected that automated driving will enhance road safety, increase highway capacity, reduce carbon emissions, and make transportation more accessible to disabled and older people. However, fully automated ...

Agile aerial manipulation: an approach based on full-body dynamics and model predictive control 

Martí Saumell, Josep (Data de defensa: 2024-04-30)

(English) Aerial manipulators, which commonly take the form of multirotors with attached robotic limbs, primarily employ their limbs for pure manipulation tasks and do not rely on them during aerial locomotion. Besides, ...

Advances in nonlinear observer design for state and parameter estimation in energy systems 

Cecilia Piñol, Andreu (Data de defensa: 2022-04-19)

(English) Critical energy challenges are forcing a rapid modification of the current energy infrastructure. lndeed, larger renewable energy penetration, more distributed generation and storage, and higher degree of autonomy ...

Personalising robot assistance for cognitive training therapy 

Andriella, Antonio (Data de defensa: 2022-10-13)

(English) There are 50 million people worldwide living with dementia, and this number is projected to triple by 2050. While there are no pharmacological treatments for this syndrome, behavioural therapy such as cognitive ...

Modeling and reconstruction of 3D humans 

Corona Puyane, Enric (Data de defensa: 2023-11-16)

(English) Understanding humans in images has been a long-standing goal in Computer Vision. Recently, modelling and generation of virtual humans has become a popular area of research spurred by the success of deep learning, ...

Safety and adaptation in physical interaction control for robotic applications 

San Miguel Tello, Alberto (Data de defensa: 2023-09-04)

(English) Although robotic platforms have been used for a wide range of purposes, recent advances in robot autonomy raise the opportunity of bringing them closer to humans. This implies that, under any circumstance, robots ...

Visual understanding of human behavior: 3D pose, motion, actions and context 

Hernández Ruiz, Alejandro José (Data de defensa: 2023-05-30)

(English) Visual understanding of human behavior is a very broad topic that, in the abstract, means understanding what a person or group of people is doing in an image or video. In practice, it can be broken down into a ...

Towards efficient quantum repeater nodes based on solid-state quantum memories 

Duranti, Stefano (Data de defensa: 2023-03-24)

(English) Quantum repeaters are the foundation of future long-distance quantum networks. In most architectures, their functional core is constituted by quantum memories, which are devices that can store and re-emit photonic ...

Modeling and control of a vanadium redox flow battery 

Clemente León, Alejandro (Data de defensa: 2023-03-29)

(English) Due to the current climate crisis, significant efforts are being made in the field of renewable energies, being one of the main challenges the storage of energy in an efficient, environmentally friendly and ...

Event based SLAM 

Chamorro Hernández, William Oswaldo (Data de defensa: 2023-02-17)

(English) Event-based cameras are novel sensors with a bio-inspired design that exhibit a high dynamic range and extremely low latency. They sensing principle is different than the one of conventional cameras. These novel ...

Mathematical modelling and advanced control design applied to high-pressure electrolyzers for hydrogen production 

David, Martín Rafael (Data de defensa: 2021-11-08)

This thesis is mainly dedicated to the study of high-pressure alkaline electrolysis. Alkaline electrolysis is a well established technology and is commercially available. However, the operation at high pressure for dispensing ...

Kinodynamic planning and control of closed-chain robotic systems 

Bordalba Llaberia, Ricard (Data de defensa: 2021-10-29)

This work proposes a methodology for kinodynamic planning and trajectory control in robots with closed kinematic chains. The ability to plan trajectories is key in a robotic system, as it provides a means to convert ...

Position analysis based on multi-affine formulations 

Shabani, Arya (Data de defensa: 2021-07-05)

The position analysis problem is a fundamental issue that underlies many problems in Robotics such as the inverse kinematics of serial robots, the forward kinematics of parallel robots, the coordinated manipulation of ...

Collaborative social robot navigation in accompanying and approaching tasks 

Repiso Polo, Ely (Data de defensa: 2020-09-23)

Our society is evolving to include robots in our daily lives. Therefore, it is necessary to develop robots capable of collaborating with people to carry out daily tasks, for example: accompanying, searching, transporting, ...

Bridging the gap between reconstruction and synthesis 

Pumarola Peris, Albert (Data de defensa: 2021-10-13)

3D reconstruction and image synthesis are two of the main pillars in computer vision. Early works focused on simple tasks such as multi-view reconstruction and texture synthesis. With the spur of Deep Learning, the field ...

Health-aware predictive control schemes based on industrial processes 

Karimi Pour, Fatemeh (Data de defensa: 2020-07-24)

The research is motivated by real applications, such as pasteurization plant, water networks and autonomous system, which each of them require a specific control system to provide proper management able to take into account ...

Geometric computer vision meets deep learning for autonomous driving applications 

García López, Javier (Data de defensa: 2021-05-17)

This dissertation intends to provide theoretical and practical contributions on the development of deep learning algorithms for autonomous driving applications. The research is motivated by the need of deep neural networks ...

Fashion discovery : a computer vision approach 

Rubio Romano, Antonio (Data de defensa: 2021-07-23)

Performing semantic interpretation of fashion images is undeniably one of the most challenging domains for computer vision. Subtle variations in color and shape might confer different meanings or interpretations to an ...

Advanced energy management/control strategies for smart manufacturing systems 

Diaz Castañeda, Jenny Lorena (Data de defensa: 2020-03-27)

This thesis is devoted to the study of the optimisation-based control techniques for the design of control strategies that contribute to improve the energy efficiency of smart manufacturing systems. Currently, manufacturing ...

Més