Mostrando ítems 44-63 de 79
Budhe, Sandip Rudha (Fecha de defensa: 2014-07-24)
In recent years, the use of composite materials in the aeronautic, automotive, marine construction, etc. has increased significantly. Hence, there is an increasing need for repair technologies on primary structural components, ...
Jahani, Younes (Fecha de defensa: 2022-11-11)
There is a general trend towards rehabilitation and strengthening of existing reinforced concrete (RC) structures due to the costs associated with the replacement of the structural members and the environmental impact ...
Ribera Roget, Albert (Fecha de defensa: 2013-03-20)
This doctoral thesis explores HR management through systems of production incentives in the construction sector which has been instrumental to the Spanish economy. The transformation of a time-based payment system to a ...
Massaguer Colomer, Albert (Fecha de defensa: 2018-06-08)
The current work is focused on two areas related to thermoelectricity: (i) the study of the capability of controlling the thermal conductivity of TEMs and (ii) the development, testing and improvement of an automotive ...
Ximinis Tarrés, Joan (Fecha de defensa: 2022-09-07)
First part of this research is focused in validating the Exhaust Gas Heater (EGH) viability in reducing NOx emissions without negative effects in a standard exhaust gas circuit. Experimentation was held using a HDV Euro ...
Duran Sureda, Imma (Fecha de defensa: 2021-05-11)
NSM strengthening technique under the influence of temperature and relative humidity, in which the interaction between materials involved is analyzed, is studied in this PhD. Therefore, this work is aimed at contributing ...
Zubillaga Eceiza, Lierni (Fecha de defensa: 2014-07-11)
In the last decades, the use of laminated composites, such as Carbon Fiber Reinforce Polymer has increased in many industrial sectors. Different failure mechanisms different damage mechanism can appear in laminated ...
Sarrado Molina, Carlos (Fecha de defensa: 2015-06-11)
The present thesis aims at developing robust numerical and experimental methods for the simulation of composite adhesive joints. Firstly, a new method for the experimental characterization of adhesive joints is presented. ...
Moawad, Mohamed Abdalla Mohamed Mohamed (Fecha de defensa: 2020-07-30)
The main objective of this work is to study the long-term and residual flexura! strength of Near Surface Mounted (NSM) strengthened Reinforced Concrete (RC) beams with Carbon Fiber Reinforced Polymers (CFRP) strips when ...
González Ruiz, Jose Antonio (Fecha de defensa: 2024-05-27)
Historically, the manufacture of advanced composite parts has been characterised by low-volume production, but is increasingly moving towards mass production. This new scenario, where competitiveness is on the rise, requires ...
Marín Hernández, Lorena (Fecha de defensa: 2015-11-13)
In the common design and certification process, a large number of experimental tests, going from small specimens to the full structure, are performed. In these tests, the environmental conditions, especially temperature ...
Guillamet Busquets, Gerard (Fecha de defensa: 2016-07-11)
Departing from an emerging technology such as the spread tow thin-ply technology, in which the ply thickness can be significantly reduced, the overall purpose of this thesis is motivated by the industry need to better ...
Sasikumar, Aravind (Fecha de defensa: 2019-07-18)
Despite the weight savings, composite materials are vulnerable to impact loads mainly due to the alarming reduction in the compression after impact strength (CAI). This thesis exploits the potential of laminate designs ...
Bagudanch Frigolé, Isabel (Fecha de defensa: 2017-11-16)
Incremental Sheet Forming (ISF) technology has been mainly applied on metallic sheets during the last years. ISF is used due to its flexibility, low costs, low batch production, production of complex geometries and customized ...
López Sánchez, Ángel (Fecha de defensa: 2004-07-27)
The objective of this research is to study the influence of several recycling cycles on the mechanical properties of four different materials made by the injection of polystyrene. <br/>The four materials studied have ...
Vergés Tejero, Arnau (Fecha de defensa: 2021-03-12)
THE GARDEN CITY. This is the name under which Eixample Malagrida (the extension district) of the city of Olot is known; this is what it was called in the only plans available to us of the project that was born in the middle ...
Medina Escobar, Sergio Alonso (Fecha de defensa: 2022-11-25)
The rate-dependent behaviour of the interlaminar fracture toughness of fibre reinforced composites has been a matter of research during the last decades. However, the results obtained so far are not conclusive and further ...
Providência, António Bernardo (Fecha de defensa: 2012-07-26)
This PHD is about design as a tool of interaction based in information systems, allowing not only to understand the relationship of design with the user, as also, based on User Centered Design, to create a methodology that ...
Gironès Güell, Xavier (Fecha de defensa: 2013-01-21)
For the manufacture of gypsum powder applied and checked on its setting, using multiple components. One of the intrinsic components of construction gypsum is the anhydrite, completely dehydrated gypsum, working as inert ...
Guerrero Garcia, José Manuel (Fecha de defensa: 2020-02-07)
In this thesis, a micromechanical model for predicting the tensile failure process in hybrid and non-hybrid unidirectional composite materials under fibre tensile loading is developed. Derived from this, the influence that ...