Now showing items 38-57 of 79
Piedrafita Francos, Daniel (Date of defense: 2014-12-01)
In this thesis two all-steel BRB have been designed, manufactured and tested, and both satisfy the testing protocols required by EU and US codes. They are composed of a steel slotted restraining unit which stabilizes the ...
Comamala Laguna, Martí (Date of defense: 2019-07-31)
Since the beginnings of the automotive driven with internal combustion engines all the cycles used in the alternative motors share a thermal characteristic, a large amount of heat released by the fuel is lost in the form ...
Manterola Najera, Julen (Date of defense: 2020-07-16)
Advanced joining technologies such as bonded joints play an important role to develop more efficient and durable structures. The present Thesis gives a step forward and proposes different solutions to characterise the ...
Soto Masip, Albert (Date of defense: 2018-09-07)
Fiber reinforced composite materials are nowadays used in several industrial applications that pursue structural weight reduction to reduce fuel consumption. The stiffness-to-weight and strength-to-weight ratios of composite ...
Carreras Blasco, Laura (Date of defense: 2019-07-17)
The overall purpose of this Ph.D. thesis is to contribute to the reliable design of composite structures subjected to fatigue-driven delamination. The aim is motivated by a wish to reduce the amount of experimental testing ...
Comas Hervada, Bruna (Date of defense: 2014-07-14)
Flame spread over solid samples has been studied from many points of view, as it is key for fire safety, yet it is a complex phenomenon that involves processes occurring in both the solid and the gas phases. This Ph.D. ...
Budhe, Sandip Rudha (Date of defense: 2014-07-24)
In recent years, the use of composite materials in the aeronautic, automotive, marine construction, etc. has increased significantly. Hence, there is an increasing need for repair technologies on primary structural components, ...
Jahani, Younes (Date of defense: 2022-11-11)
There is a general trend towards rehabilitation and strengthening of existing reinforced concrete (RC) structures due to the costs associated with the replacement of the structural members and the environmental impact ...
Ribera Roget, Albert (Date of defense: 2013-03-20)
This doctoral thesis explores HR management through systems of production incentives in the construction sector which has been instrumental to the Spanish economy. The transformation of a time-based payment system to a ...
Massaguer Colomer, Albert (Date of defense: 2018-06-08)
The current work is focused on two areas related to thermoelectricity: (i) the study of the capability of controlling the thermal conductivity of TEMs and (ii) the development, testing and improvement of an automotive ...
Ximinis Tarrés, Joan (Date of defense: 2022-09-07)
First part of this research is focused in validating the Exhaust Gas Heater (EGH) viability in reducing NOx emissions without negative effects in a standard exhaust gas circuit. Experimentation was held using a HDV Euro ...
Duran Sureda, Imma (Date of defense: 2021-05-11)
NSM strengthening technique under the influence of temperature and relative humidity, in which the interaction between materials involved is analyzed, is studied in this PhD. Therefore, this work is aimed at contributing ...
Zubillaga Eceiza, Lierni (Date of defense: 2014-07-11)
In the last decades, the use of laminated composites, such as Carbon Fiber Reinforce Polymer has increased in many industrial sectors. Different failure mechanisms different damage mechanism can appear in laminated ...
Sarrado Molina, Carlos (Date of defense: 2015-06-11)
The present thesis aims at developing robust numerical and experimental methods for the simulation of composite adhesive joints. Firstly, a new method for the experimental characterization of adhesive joints is presented. ...
Moawad, Mohamed Abdalla Mohamed Mohamed (Date of defense: 2020-07-30)
The main objective of this work is to study the long-term and residual flexura! strength of Near Surface Mounted (NSM) strengthened Reinforced Concrete (RC) beams with Carbon Fiber Reinforced Polymers (CFRP) strips when ...
González Ruiz, Jose Antonio (Date of defense: 2024-05-27)
Historically, the manufacture of advanced composite parts has been characterised by low-volume production, but is increasingly moving towards mass production. This new scenario, where competitiveness is on the rise, requires ...
Marín Hernández, Lorena (Date of defense: 2015-11-13)
In the common design and certification process, a large number of experimental tests, going from small specimens to the full structure, are performed. In these tests, the environmental conditions, especially temperature ...
Guillamet Busquets, Gerard (Date of defense: 2016-07-11)
Departing from an emerging technology such as the spread tow thin-ply technology, in which the ply thickness can be significantly reduced, the overall purpose of this thesis is motivated by the industry need to better ...
Sasikumar, Aravind (Date of defense: 2019-07-18)
Despite the weight savings, composite materials are vulnerable to impact loads mainly due to the alarming reduction in the compression after impact strength (CAI). This thesis exploits the potential of laminate designs ...
Bagudanch Frigolé, Isabel (Date of defense: 2017-11-16)
Incremental Sheet Forming (ISF) technology has been mainly applied on metallic sheets during the last years. ISF is used due to its flexibility, low costs, low batch production, production of complex geometries and customized ...